HS120 HDMI Splitter User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Important Safety Instructions............................................................................................ 3 Function................................................................................................................................ 3 Installation............................................................................................................................ 4 LED Indication..............................................................................
Important Safety Instructions Please read instructions carefully before operation 1. 2. 3. 4. 5. 6. 7. 8. 9. To prevent risk of electric shock, do not remove cover of the unit. Refer all servicing to qualified service personnel only. Do not use the splitter near water or any other liquid. Clean only with dry cloth. Do not install or place this unit in a bookcase, built-in cabinet or in any other confined space. Ensure the unit is well ventilated.
Installation How to connect the splitter to your devices 1. 2. 3. Connect the signal source from devices such as Blu-ray DVD players, Gaming consoles like PS3 and Xbox 360, Set top boxes, etc. into the HDMI Splitter input. (Use HDMI to HDMI cable for HDMI Source or HDMI to DVI cable for DVI Source) Connect cables from the HDMI Splitter output to your display devices such as HDTV’s or HD projectors.
Specifications Standard Compliance HDCP 1.2 HDMI Output Port HS120 – 2 HDMI Input Ports 1 Signal Range Up to 1080p@60Hz with 36-bit color depth Power Adapter Supply 5V, 1.4A (HS120) Power Adapter Format Input: ~ 100V – 240V, 50/60Hz AC Output: 5V DC Support Video Color Format Deep Color 24bit/36bit Operating Temperature -15°C to +55°C, 5°F to 131°F Operating Humidity 5% - 90% RH (No condensation) Product Dimension HS120 – 4.5” x 2.5” x 1.0”, 117mm x 64.
Input Video Signal 5 volts p-p Full-HD Chain 1080p Cascade up to 3 Layers HDMI Output Cable Distance <= 15m (If longer length is required, amplifier must be used) Supports 3D Yes Charts HS120 HDMI Signal Source HDMI In LED OUT 2 HDMI Display Device 1 HDMI OUT 1 LED OUT 1 HDMI Display Device 2 HDMI OUT 2 DC 5V 6 Kinivo HS120 HDMI Splitter
Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in good-working condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase. The product has been tested to meet the highest quality standards in each testing category. In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge.
Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below). Kinivo Product Support Email : support@kinivo.com Live chat : http://support.kinivo.
This page intentionally left blank
1 year limited hardware warranty Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.