WHD110 WIRELESS 5G HD AV KIT User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Important Safety Instructions.......................................................................................................................... 3 Introduction....................................................................................................................................................... 3 Features..............................................................................................................................................................
Read all safety and operation instructions before installing and using the product. Warning: To reduce the risk of fire or electric shock, do not expose the product to water or moisture. Important Safety Instructions 1. Do not expose the product to liquid, moisture or areas of high humidity. 2. Do not use abrasive cleaners to clean the product as it may damage the unit. Always unplug and power off the unit before cleaning. 3. Do not expose the product to extremely high or low temperatures. 4.
Product Overview WHD110 WIRELESS HD AV KIT TRANSMITTER Power Switch IR Output Link Indicator HDMI Input Power LED Power Input Pairing Button Wireless HDMI Transmitter Unit (TX) WHD110 WIRELESS HD AV KIT RECEIVER Power Switch Link Indicator Power LED IR Sensor HDMI Output Power Input Pairing Button Wireless HDMI Receiver Unit (RX) 4 Kinivo WHD110 Wireless 5G HD AV Kit
Getting Started Wireless 5G HDMI Environment Setup IR “EYE”Input HDMI Input HDMI Output Wireless HDMI Transmitter Unit (TX) HDMI Input device (DVD Player, gaming console, cable/satelite box etc) Wireless HDMI Receiver Unit (RX) Remote control of the HDMI Input device (DVD Player, gaming console, cable/satelite box etc) TV/Projector The Wireless HDMI Transmitter broadcasts wirelessly over 5G to the HDMI Receiver.
Installation HDMI Input HDMI Output Wireless HDMI Transmitter Unit (TX) Wireless HDMI Receiver Unit (RX) IR Extension Cable HDMI Input device (DVD Player, gaming console, cable/satelite box etc.) HDMI Output device (HDTVs, Monitors, Projectors etc.) 1. Transmitter 6 1. Place the Transmitter (TX) near the HDMI input device (Media player, gaming console, cable box, etc.) 2. Connect the HDMI input device to the HDMI IN port of the Transmitter using an HDMI cable. 3.
2. Receiver 1. Place the Receiver (RX) near the HDMI output device (HDTVs, monitors, projectors, etc.) 2. Connect the HDMI output device to HDMI OUT port of the Receiver using an HDMI cable. 3. Connect the power adapters to the Transmitter and the Receiver. After following these steps, the Wireless HDMI Kit is ready to use. Simply power on all devices to begin operation. Connection The Transmitter and Receiver will automatically create a wireless link upon being powered on.
Troubleshooting 1. Not receiving any output / The display is blank 1. Check that all connections are correctly made and that all units are powered on. 2. Check that the blue LEDs are lit on both the Transmitter and Receiver. 3. If the Transmitter or Receiver are positioned horizontally, move them to the vertical position. The vertical position may help improve the signal quality. 4. Power the Transmitter and Receiver on and off. 5.
Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s. You may also reach us via email or live chat (details below). Kinivo Product Support Email : support@kinivo.com Live chat : http://support.kinivo.
1hardware warranty year limited Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
