Owner manual

WID320 Wireless N USB Adapter
User Manual
p.4
Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com
1.3 System Requirements
Minimum computer requirements:
● CD Drive (for driver installation). Alternatively the drivers and the manual can be
Downloaded from http://support.kinivo.com
● 733MHz CPU or faster
● 64MB Memory or higher
● Operating System
○ Windows XP or higher
○ Linux 2.6 or newer
○ Mac OS X 10.4 or newer
2. Operation
To use the WID320 Wireless-N USB Adapter, simply plug the device into an available USB slot
on the computer or laptop.
If the drivers have not been loaded previously, continue by installing the drivers for your
respective operating system (see the following sections).
Note: Under normal operation, the WID320 LED indicator will turn on when plugged in. When
the adapter is in use, the LED indicator will blink.
2.1 Windows Installation (XP, Vista, 7)
Note: You will be required to restart your computer after installing.
1. Insert the Kinivo Software CD and run the setup when prompted. Alternatively, you can
download the drivers from support.kinivo.com
.