Operation Manual Kamio ® KAM6E Part No.
Kamio 6E Kit (On-Camera/ENG) The Kamio 6E is a ring-light that clips to the lens of film or video cameras. It is powered by an on-board 12-24VDC dimming ballast (BAL-149X). Main application is for front-fill beauty light for ENG stand-up interviews. KIT-KAM6E Kamio 6E Kit, (On-Camera/ENG) Kit Contents: 1 Kamio 6E Ring-Light (112mm) w/ 3ft Harness 1 Kamio 12VDC On-Camera Ballast 1 Ballast Mount 1 Baby Shoe Mount 1 Travel Case Dimensions: 21 x 7.5 x 17” (53.5 x 19 x 43cm) Weight: 10 lb (4.
Kamio Assembly 3
Kamio Detail Mounting Kamio to Lens The Kamio 6E Ring-Light is designed to mount directly onto the camera lens. An expandable clamping ring is designed to fit lenses with an outside diameter of 112mm (e.g. Panavision Primo Primes). Turn the locking screw to clamp down on the lens. Lens adapter rings are available to accommodate various smaller lens diameters. (See “Accessories” for details.) Note: The Kamio is only recommended for fixed barrel lenses.
Changing Lamps Extract the lamp by pushing the lamp harness through the reflector. The lamp will clear the reflector making it easier to grasp. Applying Gel Filters IMPORTANT: Prior to using the filter frame, remove translucent protective plastic coating from both sides. Use the steel gel template to cut a filter to the correct size. The filter is then taped to the transparent filter frame.
Ballast Operation Warning! To Ensure Proper Operation ALWAYS TURN OFF THE BALLAST BEFORE connecting or disconnecting lamps, harnesses or head extension cables. Maximum distance is 30ft (2 x 15ft cables). Ballast Operation The Kamio Ballast (BAL-149X) operates remote from the fixture. Connect the Kamio lamp harness to the extension cable or the Ballast, making sure to rotate the locking ring until it clicks into the locked position. After the lamps are properly installed, the Ballast can be turned on.
Mounting Ballast MTP-141 Mounting Bracket, MTP-141, is required to mount the ballast to a baby pin. Loosen thumbscrew on the MTP-141 sufficiently to allow the flange to insert into the track on the underside of the ballast. MTP-141S Baby Shoe Adapter, MTP-141S, is used to mount the Ballast to a camera equipped with a hot shoe receptacle. Slide the flange of the MTP-141S into the hot shoe receptacle on the camera. Lock the pin by screwing down the thumbscrew.
Lamps and Adapter Rings 06C-K32 06C-K55 6” Kino KF32 6” Kino KF55 KAM58/85 58-85mm Threaded ring adapter KAM72/85 72-85mm Threaded ring adapter 80mm / Fits Zeiss Super Speed Lenses KAM80 Canon 16X Mechanical Zoom KAM82 KAM84 KAM85 KAM86 KAM87 KAM89 82mm / Fits Fuji 16x5.5/13x5.5/.
Kit Components and Accessories GFR-KAM6 GFR-KAM6T Kamio Gel Frame Kamio Gel Frame Template HAR-KAM6 Kamio Lamp Harness, 3ft KAM6L Kamio 6 Barndoor, Long KAM6S Kamio 6 Barndoor, Short (2pk) MTP-141 Kamio Ballast Mount (16mm) MTP-141C Kamio Ballast Clamp w/ Baby Pin (16mm) MTP-141P Kamio Ballast Baby Mount w/ ¼” Screw (16mm) 9
MTP-141S Kamio Ballast Baby Shoe Mount (16mm) PWC-141A Kamio to Anton Bauer Battery Adapter, 3ft Caution: For AC operation of Camera and Kamio, do not use Battery Charger. The combined load exceeds the Charger’s capacity. Use Kino Flo’s AC Power Supply PWS-156X for AC operation of Kamio Only. PWC-141X Kamio to 4-Pin xlr, 8ft PWS-156X 6.
Ballast Specifications BAL-149X Kamio Ballast, 12-24VDC w/ 4-Pin xlr BAL-149X Input Voltage: 12-24VDC Power Rating: 12VDC = 30 Watts @ 2.5 amps 15VDC = 30 Watts @ 2.0 amps 24VDC = 31 Watts @ 1.3 amps Switching: On/Off Output Frequency: 25 kHz Size: 4.7 x 2.5 x 2” (11.9 x 6.4 x 5.1cm) Weight: 1.0 lb (0.4kg) Weight w/ Mount: 1.2 lb (0.5kg) Ballast Specifications KAM6E Kamio 6E (On-Camera/ENG) KAM6E Fixture Dimensions: 10 x 9 x 2” (25.
For latest Warranty information and Certifications, see Kino Flo website at www.kinoflo.com. Environmental: Disposal of Old Electrical & Electronic Equipment. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. This product is made of recyclable materials and should be disposed of in accordance with local and state regulations. 12 Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA Tel: 818 767-6528 website: www.kinoflo.