Operation Manual Celeb 250/450/450Q LED DMX Part No.
Celeb LED DMX Systems Center Mount CEL-250CU Celeb 250 LED DMX Center, Univ CEL-450CU Celeb 450 LED DMX Center, Univ CEL-250YU Celeb 250 LED DMX Yoke, Univ CEL-450YU Celeb 450 LED DMX Yoke, Univ CEL-450QU Celeb 450Q LED DMX Yoke, Univ CEL-250PU Celeb 250 LED DMX Pole-Op, Univ CEL-450PU Celeb 450 LED DMX Pole-Op, Univ Yoke Mount Pole-Op CEL-450QPU Celeb 450Q LED DMX Pole-Op Univ Included w/ all Celeb Models LVR-CE290-P Celeb 250 Louver/HP, 90° LVR-CE490-P Celeb 450 Louver/HP, 90° LVR-CE4
Celeb 250 LED DMX Kits KIT-C250U Celeb 250 LED DMX Center Mount Kit, Univ Kit Contents: 1 Celeb 250 LED DMX Center Mount 1 Flight Case Celeb 250 LED DMX Center Kit Weight: 31 lb (14kg) Dimensions: 29 x 10.5 x 17” (74 x 27 x 43cm) KIT-C250YU Celeb 250 LED DMX Yoke Mount Kit, Univ Kit Contents: 1 Celeb 250 LED DMX Yoke Mount 1 Jr. Pin 1 Ship Case Celeb 250 LED DMX Yoke Kit Weight: 40 lb (18kg) Dimensions: 32.5 x 8.
Celeb 450 LED DMX Kits KIT-C450U Celeb 450 LED DMX Center Mount Kit, Univ Kit Contents: 1 Celeb 450 LED DMX Center Mount 1 Flight Case Celeb 450 LED DMX Center Kit Weight: 52.5 lb (24kg) Dimensions: 53.5 x 11 x 16.5” (136 x 28 x 42cm) KIT-C450YU Celeb 450 LED DMX Yoke Mount Kit, Univ Kit Contents: 1 Celeb 450 LED DMX Yoke Mount 1 Jr. Pin 1 Ship Case Celeb 450 LED DMX Yoke Kit Weight: 57 lb (26kg) Dimensions: 54.5 x 9.5 x 25” (138.5 x 24 x 63.
Center Mount MTP-LBC Mounted on a baby stand Mounted to pipe grid The Celeb 250 Center Mount fixture includes a Lollipop w/ Baby Receiver (16mm) (MTP-LBC) which allows the fixture to be mounted directly onto a baby stand or hung from a grid with a baby pipe clamp. Note: The handles on the back of the fixture provide an attachment point for a safety chain. Turn the knob to loosen or tighten the orientation of the mount.
Baby Offset Arm MTP-B41F Kino Offset w/ Baby Receiver (16mm) The Kino Offset w/ Baby Receiver (MTP-B41F) allows the Celeb 250 Center Mount to mount on the center of a stand or it can also be under slung from a baby stand to use as an up light. It cannot be used with the Celeb 450 due to weight capacity. Yoke Mount MTP-I40 MTP-I80 The yoke has a ½” hole to accept industry standard mounting hardware.
Pole-Op The Pole-Op fixtures include a yoke with an attached junior pin. They can be hung from a grid with a Junior pipe hanger. Junior pin attached to Pole-Op Yoke Operating Pole-Op The Blue cup alters the Pan (left or right). The White cup alters the Tilt (up or down). Warning! Do not pull yoke to adjust tilt. Turn the white knob counter clockwise to angle the yoke 90°. (ParaBeam shown for illustration purposes only.
Inserting Louver The Celeb includes spring loaded accessory holders to hold the Honeycomb Louver. Place the long edge of the Honeycomb Louver into the lower channel. Press down on the left and right corners of the Louver and slip the upper edge into the upper channel of the fixture. To remove, reverse the procedure. Note: Do not press down along the top center portion of the Louver. Doing so may deform the Louver over repeated usage.
SnapBag & SnapGrid The SnapBag accessory is a lightweight fabric tailor-made for the Celeb LED. It slips over the fixture and is attached with straps. The reflective material intensifies the soft light. The removable Magic cloth or Grid cloth attaches to the inside with Velcro. The SnapGrid accessory is constructed of pre-stretched fireproof fabric with a built-in stainless steel frame. It unfolds and snaps into place.
Inserting Barndoors Position the barndoors alongside the extruded edge of the fixture. Align the thumbscrews with the adjustable receptacle holes in the fixture and insert into place. Lock the barndoors by turning the silver thumbscrew. To remove, reverse the procedure. For replacement screws, use M5 Metric size screws. BRD-CE2 10 Note: To adjust the placement of the receptacle holes, use a pointed tool (such as a pen) to slide the holes within the extruded edge.
Fixture Power AC Input The Celeb is powered AC and includes an IEC connection. A locking power cord is included with the fixture. To remove the plug, move the red tab to release. The fixture has a built-in power supply with universal input from 100-240VAC. Note: The Celeb 250 is shown for example purposes only. The IEC power cords for the Celeb 450 and 450Q are in a different location. DC Input The Celeb 250 can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin XLR.
Control Panel - White Mode A B C D E F G H A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the fixture. The On /Off button only controls the light source. B) Menu: Provides access to menu options such as General settings, Reset, DMX and DMX Wireless settings.
Control Panel - Color & RGB Mode A B C D A B C D Color Mode A) Menu: Provides access to menu options such as General settings (Color Mode), Reset, DMX and DMX Wireless settings. Tip: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB). B) Kelvin, G/M (Green/Magenta) Gel, Hue & Saturation Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000.
Accessories BRD-CE2 BRD-CE4 BRD-CE4-Q Celeb 250 Barndoors (Set of 4) Celeb 450 Barndoors (Set of 4) Celeb 450Q Barndoors (Set of 4) DFS-CE200-S Celeb 250 SnapBag w 2 x Diffusion DFS-CE400-S Celeb 450 SnapBag w 2 x Diffusion DFS-CE400Q-S Celeb 450Q SnapBag w 2 x Diffusion LVR-FS240-S Celeb 250 SnapGrid, 40° LVR-CE440-S Celeb 450 SnapGrid, 40° LVR-CE440Q-S Celeb 450Q SnapGrid, 40° LVR-CE290-P LVR-CE260-P LVR-CE490-P LVR-CE460-P LVR-CE490-QP LVR-CE460-Q Celeb 250 Louver/HP 90° Celeb 250 Louver/HP 60° Cele
MTP-I80 Junior Pin Assembly for Yoke (28mm) MTP-I40 Baby Receiver Assembly for Yoke (16mm) KAS-CE2 KAS-CE2-C KAS-CE4 KAS-CE4-C Celeb 250 Flight Case Celeb 250 Travel Case Celeb 450 Flight Case Celeb 450 Travel Case KAS-CE2-Y Celeb 250 Yoke Ship Case KAS-CE4-Y Celeb 450 Yoke Ship Case KAS-CE4-Q Celeb 450Q Yoke Ship Case STD-M30 Medium Duty Stand/Black, 30” STD-M36 Medium Duty Stand/Black, 36” 7010032 7010045 7010048 Celeb 250 Yoke Assembly Celeb 450 Yoke Assembly Celeb 450Q Yoke Assembly 7010038 70
Fixture Specifications CEL-250CU Celeb 250 LED DMX Center Mount, Univ Celeb 250 LED DMX Center AC Input Voltage: 100~240VAC 50/60Hz, 145W Amperage VAC: 1.2A at 120VAC, 0.7A at 230VAC DC Input Voltage: 18~36VDC, 150W Amperage VDC: 6.25A at 24VDC Kelvin Range: 2700K~6500K (White Mode) 2500K~9900K (Color Mode) Dimming Range: 100%~1% Weight: 15 lb (6.8kg) Dimensions: 24 x 5 x 14” (61 x 12.7 x 35.5cm) CEL-250YU Celeb 250 LED DMX Yoke AC Input Voltage: 100~240VAC 50/60Hz, 145W Amperage VAC: 1.
CEL-450CU Celeb 450 LED DMX Center Mount, Univ Celeb 450 LED DMX Center AC Input Voltage: 100~240VAC 50/60Hz, 255W Amperage VAC: 2.5A at 120VAC, 1.1A at 230VAC Kelvin Range: 2700K~6500K (White Mode) 2500K~9900K (Color Mode) Dimming Range: 100%~1% Weight: 26 lb (12kg) Dimensions: 45 x 5 x 14” (114.5 x 13 x 36cm) CEL-450YU Celeb 450 LED DMX Yoke AC Input Voltage: 100~240VAC 50/60Hz, 255W Amperage VAC: 2.5A at 120VAC, 1.
CEL-450QU Celeb 450Q LED DMX Yoke AC Input Voltage: 100~240VAC 50/60Hz, 270W Amperage VAC: 2.7A at 120VAC, 1.1A at 230VAC Kelvin Range: 2700K~6500K (White Mode) 2500K~9900K (Color Mode) Dimming Range: 100%~1% Weight: 24 lb (11kg) Dimensions: 30 x 5 x 26” (72 x 13 x 66cm) CEL-450QPU Celeb 450Q LED DMX Pole-Op 18 Celeb 450Q LED DMX Yoke Mount, Univ Celeb 450Q LED DMX Pole-Op, Univ AC Input Voltage: 100~240VAC 50/60Hz, 270W Amperage VAC: 2.7A at 120VAC, 1.
FCC Part 15 Verification: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. FCC Part 15 Declaration of Conformity: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
