User Manual

Control Panel - White Mode

D E F G H

A) On /Off: On = Green light displayed. Off = Red light displayed. The display and

all menu settings can be operated while the power button is in the Off position,

as long as power is applied to the xture. The On /Off button only controls the

light source.

B) Menu: Provides access to menu options such as General settings, Reset, DMX and

DMX Wireless settings. Tip: While on control screen, press and hold for 3 seconds to

switch through menus (White, Gels & Hue, RGB).

C) Kelvin & G/M (Green/Magenta) Preset Buttons: Factory defaults left to right are:

2700K, 3200K, 5000K and 6500K. G/M default value is 000. User can also use

these preset buttons to store custom Kelvin and G/M settings.

D) Display: Provides access to Dim, Kelvin, G/M, and DMX channel.

Factory reset will show: Dim = 10%, Kelvin = 2700K, G/M = 000, DMX = 001.

E) Lock: Press the Lock button to disable all buttons and control knob.

Press for 3 seconds to restore presets to default factory settings.

F) Mode: Press to navigate from Dim to Kelvin and G/M settings. When in sub-menus,

pressing Mode always returns you to main display. When DMX is applied, use Mode

to access DMX channel on main display. Tip: Long press will bring you back one step.

G) Data Port: Mini B USB for software updates.

H) Dimmer Knob: Manually adjusts Dim, Kelvin, G/M levels and DMX address.

Press the knob to toggle between ne and coarse adjustments or when selecting

options within menus.

DMX Note: Each Celeb LED has an “AUTO TERMINATE” feature. The last xture that

does not have an XLR cable attached to the DMX “Out” port will automatically

terminate.