User Manual

Yoke Mount
MTP-I40
MTP-I80
Baby Offset Arm
The Kino Offset w/ Baby Receiver (MTP-B41F) allows the Celeb 250 Center Mount to
mount on the center of a stand or it can also be under slung from a baby stand to use
as an up light. It cannot be used with the Celeb 450 due to weight capacity.
MTP-B41F Kino Offset w/
Baby Receiver (16mm)
The yoke has a ½” hole to accept industry standard mounting hardware.
The Celeb 250 Yoke Mount xture can hang from a grid by a baby pipe hanger using
a Baby Receiver Assembly for Yoke (MTP-I40), sold separately or a junior pipe hanger
using a Junior Pin Assembly for Yoke (MTP-I80), also sold separately. The Celeb 450
Yoke Mount and Celeb 450Q Yoke Mount can also hang by a junior pipe hanger with
the MTP-I80.
Warning: Use only M5 X 10mm screws (supplied) to assemble yoke.
Note that threads on the xture are self-locking and may seem tight.
Replacement screws: Part No. 2020127
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
6