Operation Manual Diva-Lite 41, 31, 21 LED (True Match® Firmware 3.0) Part No.
Diva-Lite LED DMX Systems DIV-L21XCU Diva-Lite 21 LED DMX Center, Univ DIV-L31XCU Diva-Lite 31 LED DMX Center, Univ DIV-L41XCU Diva-Lite 41 LED DMX Center, Univ DIV-L21XYU Diva-Lite 21 LED DMX Yoke, Univ DIV-L31XYU Diva-Lite 31 LED DMX Yoke, Univ DIV-L41XYU Diva-Lite 41 LED DMX Yoke, Univ Center Mount Yoke Mount Included w/ all Diva-Lite Models LVR-SL290-P Diva-Lite 21 Louver/HP, 90° LVR-SL390-P Diva-Lite 31 Louver/HP, 90° LVR-SL490-P Diva-Lite 41 Louver/HP, 90° Included w/ all Diva-Lite
Diva-Lite 31 LED DMX Kits KIT-DL31XU Diva-Lite 31 LED DMX Kit w/ Travel Case, Univ Kit Contents: 1 Diva-Lite 31 LED DMX Center 1 Travel Case Diva-Lite 31 LED DMX Kit w/ Travel Case Dimensions: 45.5 x 9 x 16.5” (116 x 23 x 42cm) Weight: 33.5 lb (15kg) Diva-Lite 21 LED DMX Kits KIT-DL21XU Diva-Lite 21 LED DMX Kit w/ Travel Case, Univ Kit Contents: 1 Diva-Lite 21 LED DMX Center 1 Travel Case Diva-Lite 21 LED DMX Kit w/ Travel Case 3 Dimensions: 28.5 x 8.5 x 16” (72.5 x 22 x 41cm) Weight: 22.
Power AC Input The Diva-Lite LED is powered AC and includes an IEC connection. It also includes a 12ft power cord with a locking IEC connector. It includes a built-in power supply with universal input from 100-240VAC. Ambient Operating Temperature The Diva-Lite LED is designed to operate at temperatures from 14°F to 104°F (-10°C to 40°C). DC Input The Diva-Lite LED can also be operated on 24VDC (input range 18-36VDC) through a 3-Pin XLR.
Mounting Procedures Mounted on a baby stand. Mounted to pipe grid. Note: When hanging in a studio, loop a safety cord through the metal ring provided on the back of the fixture. Turn the knob to loosen or tighten the mount. Lollipops are interchangeable.
Baby Offset Arm MTP-B41F Kino Offset w/ Baby Receiver (16mm) The Baby Offset Arm (MTP-B41F) allows fixtures to mount on the center of a stand or it can also be under slung from a baby stand to use as an up light. Applying Louver The Louver is fastened to the fixture with 4 Velcro straps.
SnapBag & SnapGrid The SnapBag accessory is a lightweight fabric tailor-made for the Diva-Lite LED. It slips over the fixture and is attached with straps. The reflective material intensifies the soft light. The removable grid cloth attaches to the inside with Velcro.
Control Panel - White Mode A B C D E F G H A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source. B) Menu: Provides access to menu options such as General settings, Reset, DMX and DMX Wireless settings.
Control Panel - Gels/Hue Mode A B C D Gels/Hue Mode A) Menu: Provides access to menu options such as General settings (Gels/Hue Mode), Reset, DMX and DMX Wireless settings. Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, FX). B) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000.
Control Panel - RGB Mode A RGB Mode B C D A) Menu: Provides access to menu options such as General settings (RGB Mode), Reset, DMX and DMX Wireless settings. Shortcut: While on control screen, press and hold for 3 seconds to switch through menus (White, Gels & Hue, RGB, FX). B) Preset Buttons: Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. G/M default value is 000.
Control Panel - FX (Effects) A B C FX (Effects) Mode FX mode provides access to effects including Candle, Fire, TV, Police, Lightning, Paparazzi, Pulse and Scroll. Candle mode used as an example: A) FX Option: Choose the desired FX Mode by rotating the control knob. When on the desired effect, there will be several pre-programmed effects as well as control parameters that can be altered.
Accessories SYS-BK12 Block/KF21 Single Battery System, 140Whr, 28.
Fixture Specifications DIV-L21XCU Diva-Lite 21 LED Center Mount AC Input Voltage: 100~240VAC 50/60Hz, 150W Amperage VAC: 1.25A at 120VAC, 0.65A at 230VAC DC Input Voltage: 18~36VDC, 150W Amperage VDC: 6.25A at 24VDC Kelvin Range: 2700K~6500K (White Mode) Kelvin Range: 2500K~9900K (Color Mode) Dimming Range: 100%~1% Weight: 12 lb (5.5kg) Dimensions: 23.5 x 4.5 x 11.5” (60 x 11.
DIV-L31XCU Diva-Lite 31 LED Center Mount AC Input Voltage: 100~240VAC 50/60Hz, 150W Amperage VAC: 1.25A at 120VAC, 0.65A at 230VAC DC Input Voltage: 18~36VDC, 150W Amperage VDC: 6.25A at 24VDC Kelvin Range: 2700K~6500K (White Mode) Kelvin Range: 2500K~9900K (Color Mode) Dimming Range: 100%~1% Weight: 14 lb (6.5kg) Dimensions: 37.5 x 4.5 x 9.5” (95 x 11.5 x 24cm) DIV-L31XYU Diva-Lite 31 LED Yoke Mount 14 Diva-Lite 41 LED DMX Center Mount AC Input Voltage: 100~240VAC 50/60Hz, 150W Amperage VAC: 1.
FCC Part 15 Verification: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. FCC Part 15 Declaration of Conformity: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
