User Manual

FX (Effects) Mode

Control Panel - FX (Effects)

FX mode provides access to effects including Candle, Fire, TV, Police, Lightning,

Paparazzi, Pulse and Scroll. Candle mode used as an example:

A) FX Option:

Choose the desired FX Mode by rotating the control knob. When on the

desired effect, there will be several pre-programmed effects as well as

control parameters that can be altered.

B) Preset Buttons:

In FX Mode, Kelvin custom settings and any control functions displayed such

as Rate and Amplitude (Ampl) can be saved as a preset. Chosen values can

be assigned to any preset button by holding down the desired button for

3 seconds. The Kelvin display will lash once the setting is registered.

To restore presets to default factory settings, choose Reset under General

settings and Clear Presets. This method will reset all buttons in all Modes.

Shortcut: If only want to clear presets for Candle Mode, hold Lock button

for 3 seconds while Candle mode is displayed.

C) Mode:

Press to navigate from Dim to Kelvin and FX settings.

Shortcut: Long press will bring you back one step.

A C