User Manual

13
In White mode, Kelvin custom settings between 2700K to 6500K and
displayed G/M can be assigned to any preset button by holding down the
desired button for 3 seconds.
In Color mode, Kelvin custom settings between 2500K to 9900K and
displayed G/M, Gel or Hue angle and Saturation can be assigned to any
preset button by holding down the desired button for 3 seconds.
The Kelvin display will ash once the setting is registered.
To restore presets to default factory settings, choose Reset under General
settings and Clear Presets 1-4. This method will reset all buttons in White &
Color mode. Tip: If only want to clear presets individually (White or Color),
hold Lock button for 3 seconds while on that display.