User Manual
Mode: White or Color
Default is White mode. Custom Kelvin settings can be set between 2700K to 6500K.
To change to Color mode, press the control knob. Custom Kelvin settings can be set
between 2500K to 9900K.
Timeout
When choosing settings, if there is no activity, the display will default to Dim.
The default for White mode is 5 seconds; the default for Color mode is 15 seconds,
but can be changed by pressing the control knob to 0, 5, 15, 20 and 30 seconds.
Smooth
Default is On. Press control knob to turn Dim Smooth Off for instant response
for special effects such as ashing, ickering, strobing, etc. For high speed cameras,
it is recommended to keep Dim Smooth On.
Screen Normal
Press control knob to rotate display.
Factory Reset
To reset to factory settings, press the control knob to select Reset, press to select
Factory Reset. Rotate the control knob to select Yes and press to conrm reset.
Main display will default to: Dim = 10%, Kelvin = 2700K, G/M = 000 and DMX = 001.
Note: Factory Reset resets settings in White mode and Color mode.
Clear Presets 1-4
Will reset buttons 1-4: 2700K, 3200K, 5000K, 6500K. G/M will reset to 000. Press the
control knob to select Clear Presets 1-4. Rotate the control knob press to select Yes
and press to conrm.
Note: Clear Presets 1-4 resets buttons in White mode and Color mode.
17