User Manual

DMX

White mode:

In White mode, the Select LED operates on three DMX channels using DMX512

while in the default 8 Bit Dim mode. The rst channel operates dimming; 2nd channel

operates Kelvin color temperature control from 2700K to 6500K; 3rd channel operates

G/M. Once an address is selected, the xture automatically assigns 3 channels.

Color Mode

In Color mode, the Select LED operates on six DMX channels using DMX512 while in

the default 8 Bit Dim mode. The rst channel operates dimming; 2nd channel operates

Kelvin color temperature control from 2500K to 9900K; 3rd channel operates G/M;

4th channel operates the Gel; 5th channel operates the Hue angle and the 6th channel

operates the Saturation. Once an address is selected, the xture automatically assigns

6 channels.

Note: In order to control the Gel list channel, the G/M channel needs to be set to 0.

In order to control the Hue angle and Saturation channels, the G/M and Gel list

channels both need to be set to 0.

Note: If a xture loses its DMX signal, it will hold its last DMX command. For this

reason, it is important to turn a xture off using the DMX commands. For example,

if you try to turn off the lights by turning off the dimmer board, the lights will remember

their last DMX command and stay on. The xtures require a DMX “Off” or “Black-Out”

command in order to turn off.