User Manual

Mounting the Fixture

Align the center pin of the mounting plate to the

center hole on the mating plate.

Rotate plate clockwise until the four shoulder rivets

drop into the receptacle. A locking pin will snap into

place when the plate is properly seated.

The yellow wire loop provides an attachment point

for a safety chain.

To remove the plate, pull up on the locking pin and

reverse the mounting procedure.

A 180° turn loosens the orientation of the mount.

A right turn tightens the mount.

The tension on the lock lever may be adjusted by

pulling the handle away from the mount.

This disengages the handle from the screw

mechanism and allows the lever to be reoriented.

Lollipops are interchangeable.

MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)

MTP-LBC Kino 41 Lollipop w/ Baby Rcvr Curve

(16mm)

MTP-LBS Kino 41 Lollipop w/ Baby Rcvr Short

(16mm)