User Manual

Mounting the Controller

Extension Cable

Insert the 4 rubber feet of the controller into the

4 holes in the xture.

Secure the Controller to the xture with the Velcro

fastening strap.

Connect the harness to the Controller. Align the

key ways on the harness connector with the circular

receptacle on the ballast. Rotate the silver locking

ring until it clicks into the lock position.

The Select LED xture can be used with the

controller directly attached or remotely, using a

25ft extension cable. Remote operation of the

controller provides more rigging options.

To insert the cable, align the key ways on the

extension cable with the circular receptacle on the

controller. Rotate the silver locking ring until it clicks

into the lock position.

Mount Options

The Controller can be

mounted to a stand with a

ballast mount accessory,

MTP-BAL and mafer clamp.

MTP-BAL