User's Manual

SP70 User Manual 8-4
Getting Connected
Receiving a Bluetooth Beam
1. Tap
> Settings > Connections > Beam.
2. Turn on the Bluetooth as described earlier in the “Turning on and off Bluetooth” section.
3. Make sure that the device is powered on, discoverable, and within 10 meters (30 feet) of your device.
4. When prompted to receive an incoming beam, tap
Yes.
Bonding with Other Devices
A bond is a relationship that you create between your Pocket PC Phone and another Bluetooth device in
order to help exchange information in a secure manner. Creating a bond involves entering the same PIN
on the two devices you want to bond. Once a bond is created, the devices need only have their Bluetooth
turned on to exchange information; they do not need to be in discoverable mode.
Creating a Bond
1. Make sure that the two devices are placed within 10 meters of one another and that Bluetooth is in
discoverable mode on both devices.
2. Tap
> Settings > Connections > Bluetooth > Devices > New Partnership.
3. Your device searches for other Bluetooth devices and displays them in the list.
4. Tap the name of the other device, and then
Next.
5. In
Passkey, enter a passkey of between 1 and 16 characters and tap Next.
6. Enter the same passkey on the other device.
7. If you want, in
Display Name, edit the name of the other device. You may use any name.
8. Tap
Finish.
Accepting a Bond
1. Make sure that the two devices are placed within 10 meters of one another and that Bluetooth is in
discoverable mode on both devices.
2. When prompted to bond with the other device, tap
Yes.
3. In
Passkey, enter a passkey of between 1 and 16 characters and tap Next. You must enter the same
passkey that was entered on the device requested the bond.
4. If you want, in
Display Name, edit the name of the other device. You may use any name.
5. Tap
Finish. The bond is created. You can now exchange information with the other device.
8.4 Connections
You can set up connections to the Internet and corporate network at work in order to do such activities
as browse the Internet or intranet, send/receive email and instant messages, and synchronize information
using ActiveSync.
Your device has two groups of connection settings:
n My ISP settings are used to connect to the Internet.
n My Work Network settings can be used to connect to any private network, such as a corporate
network you use at work.