User's Manual
Table Of Contents
- 1.Preface
- 2.SafetyNotices
- 3.ReadytoUse
- 4.Quickguides
- 5.OperationDetails
- 6Systemsetting
- 6.1.1Wi-FiSetting
- 6.1.2External3GUSBDonglefunction
- 6.1.3ExternalRJ45USBDonglefunction
- 6.1.4Sound
- 6.1.5DisplaywallpaperSettings
- 6.1.6Storage
- 6.1.7Battery
- 6.1.8Apps
- 6.1.9Location&securityservices
- 6.2.0Language&input
- 6.2.1Backup&reset
- 6.2.2Date&time
- 6.2.3Accessibility
- 6.2.4Developeroptions
- 6.2.5aboutTablet
- 6.3Add,MoveorDeleteDesktopIcon
- 7MovilTeachers(Optional)
- 8Upgradethefirmware
- 9.TroubleshootingandFAQ
46
After select the firmware, click on to load firmware into the
Device, as shown below:
Note that:
1) Do not disconnect the device during the firmware loading;
2) If the firmware fails to be loaded to the device, following steps can be taken to make it:
a. Select the target firmware;
b. Press and hold the power key for above 10 seconds to power the device off,
then release the power key;
c. Press and hold any key (except the power key), connect the device to
PC, and
press and release the power key for five to ten times, and then
release all keys, you will find that the device automatically enters the
upgrade mode;
d. If it doesn’t work, repeat Step a to c again;
8.7 APK
The Phoenix Suit supports apk backup, restore, installation, device reboot and recovery.
Click on to enter the APK interface, as shown below:
S