User's Manual

MID User Manual
User Manual
52
7.2 hoenixSuit Operations
PhoenixSuit Interface
The Client Area on the top has four function buttons, and you can access each function by
clicking on corresponding button. PhoenixSuit stays in Home interface after running by
default;
There are three command buttons on the right of the client area, you
can click on for help, click on to minimize the window to the system task
bar, and click on to exit the PhoenixSuit.
Firmware
After the device is connected, firmware can be loaded to it. You can click on to
enter the firmware flash interface, as shown below: