User's Manual

MID User Manual
User Manual
53
Click on to select the target firmware file, as shown below:
After select the firmware, click on to load firmware into the
device, as shown below:
]
Note that:
1) Do not disconnect the device during the firmware loading;
2) If the firmware fails to be loaded to the device, following steps can be taken to make it:
a. Select the target firmware;
b. Press and hold the power key for above 10 seconds to power the device off, then
release the power key;
c. Press and hold any key (except the power key), connect the device to PC, and press
and release the power key for five to ten times, and then release all keys, you will find
that the device automatically enters the upgrade mode;
d. If it doesn’t work, repeat Step a to c again;
APK
The PhonenixSuit supports apk backup, restore, installation, device reboot and recovery.