User's Manual

MID
User Manual
38
off; connect the device to the PC by the USB cable supplied with the device.
The “Found New Hardware Wizard” window will pop up on the bottom right corner as shown
below. Choose “Install from a list or specific location (Advanced)”, and then click “Next” to install
the USB driver, see the picture below:
NOTE: The USB port of the PC must be USB2.0, or it cannot be used to update the device.
Select “Include this location in the search”, and go to find “RK3028A Android Upgrade Tool”
-“30xxDriver”-“x86”-“XP” then click “OK”. The system will detect and install the driver
automatically, finally click “Finish”, see the pictures as below:
After the driver is installed successfully, “1” will turn green, see the picture as below：