User's Manual

46
8.4 Phoenix Suit Operations
8.5 Phoenix Suit Interface
The Client Area on the top has four function buttons, and you can access each function by
clicking on corresponding button. Phoenix Suit stays in Home interface after running by
default;
There are three command buttons on the right of the client area, you
Can click on for help; click on to minimize the window to the system task
bar, and click on to exit the Phoenix Suit.
8.6 Firmware
Run Phoenix Suit tools，
After the device is connected, firmware can be loaded to it. You can click on to
enter the firmware flash interface, as shown below:
Click on to select the target firmware file, as shown below:
After select the firmware, click on to load firmware into the
device, as shown below: