Manual

M0241-01Model 3200
2-8 6/11
TM
Machine Operation
MANUAL WING FOLD FIELD OPERATION TO TRANSPORT
WARNING
Planter wings may swing suddenly and cause death or serious injury.
Do not stand between wings and frame when folding or unfolding
planter. Planter must be on a level surface in all directions.
SUMMARIZED FIELD TO TRANSPORT SEQUENCE
• Raise row markers and lower planter.
• Position turnbuckle to hold frame in level position.
• Loosen wing locking eyebolts and swing over to unlock wings.
• Raise planter.
• Install lockups on center lift cylinders.
• Retract wing lift cylinders.
• Fold wings forward and lock in place.
NOTE: Read following information for detailed instructions.
1. Fold row markers to raised transport position and lower planter to ground.
2. Swing center turnbuckle into position to hold planter frame level and tighten slightly. Install lockup pin in storage
location
NOTE: Use special wrench stored on inside of hitch for center turnbuckle and wing lock eyebolt
hex nuts. Always return wrench to storage location after use.
7. Release center turnbuckle and raise upright. Secure in
position with lockup pin.
Center turnbuckle lockup pin
Center turnbuckle installation