Owner's manual
Shank Assembly, Seed Tube, and Depth Adjustment
ITEM PART NO. QTY.
(Per Row)
DESCRIPTION
1 GA10157 1 Shank W/Gauge Wheel Pivot Spindle And Set Screw
2 G11015 2 Hex Washer Head Cap Screw, "-16 x 1¼"
3 GB0274 1 Cover, Depth Adjustment
4 GD3612 1 Cap Plug
5 GB0266 1 Handle, Depth Adjustment
6 GD10993 1 Spring
7 GB0267 1 Lever, Depth Adjustment
8 GD13361 1 Pin, " x 1"
9 GD11259 1 Sleeve, " I.D. x " O.D. x 1" Long
10 GB0285 1 Collar, Depth Adjustment
11 G10207 1 Washer, " O.D. x " I.D. x .134" (If Applicable)
12 G10669 1 Hair Pin Clip, No. 22
13 G10551 1 Clevis Pin, ¼" x 2½"
14 G11591 1 Nylon Lock Nut, "-24, Grade C
15 G11592 1 Hex Head Cap Screw, "-24 x 2¾", Grade 8
16 GD28390 1 Shield
17 G10312 2 Carriage Bolt, "-18 x ¾"
18 G10620 2 Serrated Flange Nut, "-18
19 GB0265 1 Pivot Link, Depth Adjustment
20 G10207 2 Washer, " O.D. x /" I.D. x .134"
21 GD7318 1 Sleeve, 1" Long
22 GA15287 1
See “Planter Monitor Module (PMM)” on page P207
23 GA7975 1
See “Gauge Wheels” on page P13
24 G10108 4 Lock Nut, "-16
25 GD11845 1 Dust Cap
26 G10003 3 Hex Head Cap Screw, "-16 x 1½"
27 GD24545 2 Stop
28 GD1026 1 Sleeve, 1" Long
29 G11387 2 Flat Washer, " SAE
30 G3303-98
G3303-108
G3303-16
G3303-114
G3303-124
GR0196
-
-
-
-
-
-
Chain, No. 41, 98 Pitch Including Connector Link (Mechanical)
Chain, No. 41, 108 Pitch Including Connector Link (EdgeVac)
Chain, No. 41, 16 Pitch Including Connector Link (Used W/Row Unit Extension Brackets)
Chain, No. 41, 114 Pitch Including Connector Link (Mechanical - 4 Center Rows Only)
Chain, No. 41, 124 Pitch Including Connector Link (EdgeVac - 4 Center Rows Only)
Connector Link, No. 41
31 GD23773 1 Chain Idler Spacer
32 GD11962 1 Idler
33 G10201 2 Special Washer, " x 1½" O.D.
34 G10438 1 Hex Head Cap Screw, ½"-13 x ¾"
35 GD1065 1 Idler Spring
36 GD16245 1 Sun Shade (Rubber)
37 G10687 1 Hex Head Cap Screw, "-16 x 5½"
38 GD17014 1 Hose Guide
39 G10047
G11387
G10108
1
2-3
1
Hex Head Cap Screw, "-16 x 1¾"
Flat Washer, " SAE
Lock Nut, "-16
Model 3660M0217-02
Rev. 6/14 P2
TM