MODEL 3700 FRONT FOLD PLANTER OPERATOR MANUAL M0233-01 This manual is applicable to: Rev.
This page intentionally left blank.
M0233-01 Table of Contents Overview Model 3700 Ag Leader Integra Display. . . . . . . . . . . . . . . . . . . . . . . . 2-30 To The Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Planter Monitor Module (PMM). . . . . . . . . . . . . . . . . . . . 2-30 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Kinze ISOBUS Option. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 General Information . . . . . . . . . . . . . .
Model 3700 Table of Contents Lubrication and Maintenance M0233-01 Air Clutch Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33 Lift/Ground Drive Wheel Bearing Repack or Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Lubrication Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Transport Wheel Bearing Replacement . . . . . . . . . . . . . .
To The Owner M0233-01 Model 3700 Kinze Manufacturing, Inc. thanks you for your patronage. We appreciate your confidence in Kinze farm machinery. Your Kinze planter has been carefully designed to provide dependable operation in return for your investment. This manual has been prepared to aid you in the operation and maintenance of the planter. It should be considered a permanent part of the machine and remain with the machine when you sell it.
Model 3700 Overview M0233-01 Warranty The Kinze Limited Warranty for your new machine is stated on the retail purchaser’s copy of the Warranty And Delivery Receipt form. Additional copies of the Limited Warranty can be obtained through your Kinze Dealer. Warranty, within the warranty period, is provided as part of Kinze’s support program for registered Kinze products which have been operated and maintained as described in this manual.
M0233-01 Specifications Model 3700 Specifications Specification Number of Rows Row Spacing Weight Empty (Mechanical) Weight Empty (EdgeVac) Transport Height Planting Length Transport Length Planting Width Transport Width (14'-0" with granular chemical option) Seed Capacity Transport Tire Size Conventional Hoppers 24R 22 22" 18,800 lb 20, 200 lb 10'-9" 27'-4" 32'-0" 43' 11" 13'-0" 24R 20 20" 18,300 lb 20,000 lb 10'-9" 27'-4" 32'-0" 43' 11" 13'-0" 1.90 bu. / hopper (Mechanical); 1.75 bu.
Specifications Model 3700 M0233-01 Specifications Specification Number of Rows Row Spacing Weight Empty (Mechanical) Weight Empty (EdgeVac) Transport Height Planting Length Transport Length Planting Width Transport Width (14'-0" with granular chemical option) Seed Capacity ASD Fill Dimensions (planting position) Air Seed Delivery (ASD) 24R 22 24R N 30 22" 30" 19, 900 lb 25, 241 lb 21, 300 --13'-0" 13'-0" 27'-4" 30'-11" 32'-0" 36'-11" 47'-11" 62' 9" 13'-8" 13'-8" 24R 20 20" 19,700 lb 21,100 lb 13'-0" 27
M0233-01 General Safety Rules 1. Read and understand instructions provided in this manual and warning labels. Review these instructions frequently! 2. This machine is designed and built with your safety in mind. Do not make any alterations or changes to this machine. Any alteration to design or construction may create safety hazards. 3. A large portion of farm accidents happen from fatigue or carelessness. Safe and careful operation of tractor and planter will help prevent accidents. 4.
Safety Precautions Model 3700 M0233-01 Following are some common hazard warnings associated with this equipment. Pay close attention to all safety, operating, and maintenance information in this manual and decals applied to your equipment. DANGER! Contacting or coming close to power lines or other high energy sources will cause death or serious injury. Keep away from power lines or high energy sources at all times.
Machine Operation M0233-01 Model 3700 Planter Lift Safety Lockup WARNING Uncontrolled machine movement can crush or cause loss of control resulting in death, serious injury, or damage to property and equipment. Install all safety lockup devices before working under or transporting this equipment. Safety lockup in transport/maintenance position Safety lockup in storage position Planter lift safety lockup is installed between lift cylinder and wheel lift arm. It is held in place by a pin and lynch pin.
Machine Operation Model 3700 M0233-01 WARNING Planter hitch may raise uncontrollably during folding/unfolding and can cause death, serious injury, or damage property and equipment. DO NOT fold or unfold planter without planter attached to a tractor. DO NOT unhitch planter from tractor unless fully folded for transport or fully unfolded with planting units lowered to ground.
Machine Operation M0233-01 Model 3700 WARNING Improperly operating or working on this equipment could result in death or serious injury. Read and follow all instructions in Operator Manual before operating or working on this equipment. Initial Planter Preparation Following information is general in nature to aid in preparation of tractor and planter for use, and to provide general operating procedures.
Machine Operation Model 3700 M0233-01 Tractor Requirements WARNING Loss of control of equipment during transport can result in death, serious injury, or damage to property and equipment. Tractor gross weight must be greater than planter gross weight with attachments and options. Consult your dealer for information on horsepower requirements and tractor compatibility. Requirements vary with planter options, tillage, and terrain.
Machine Operation M0233-01 Model 3700 Tractor Preparation and Hookup Digital vacuum gauge control console Planter control console 1. Install planter control console (all) and digital vacuum gauge (EdgeVac only) control consoles on tractor in convenient locations within operator reach and close to hydraulic controls. Mount control consoles securely and route power cables to power source. A power lead adapter may be required. See Lubrication and Maintenance section for wiring schematics.
Machine Operation Model 3700 M0233-01 WARNING Pressurized hydraulic fluid can penetrate body tissue and result in death, serious infection, or other injuries. Fluid injected under skin must be IMMEDIATELY removed by a surgeon familiar with this type of injury. Make sure connections are tight and hoses and fittings are not damaged before applying system pressure. Leaks can be invisible. Keep away from suspected leaks.
Machine Operation M0233-01 Model 3700 NOTICE Clean and grease PTO shaft coupling with high-pressure industrial coupling grease (Chevron® coupling grease or equivalent) meeting AGMA CG-1 and CG-2 Standards each time driveshaft is installed or premature wear and equipment failure can occur. NOTE: A tractor model-specific PTO mount kit is required and available from GnL Engineering (319-227-7222 or gnlengineering.net) and Rowe Manufacturing (800-544-4123 or rowemfg.com). 6.
Machine Operation Model 3700 M0233-01 Level Planter Approximately parallel with planting surface Level row units Clevis adjustment holes Toolbar should operate at 20"-22" height from planting surface. Tire pressures must be maintained at pressures specified for planter to operate level laterally. Check toolbar and row unit parallel arms are level front to back with planter lowered to proper operating height. Five holes in the hitch bracket allow clevis to be raised or lowered.
Machine Operation M0233-01 Model 3700 Contact Wheel Drive Sprockets Contact drive wheel sprocket Sprocket idler Contact wheel drive Optional half-rate drive sprocket Contact wheel drive works the same for mechanical or EdgeVac planters except for sprocket size. Chain tension is controlled by a spring-loaded sprocket idler. Planting rate charts in “Rate Chart” section help you select correct sprockets.
Machine Operation Model 3700 M0233-01 Wrap Spring Wrench Operation Chain idlers are equipped with wrap spring wrenches. L.H. rotation wrap spring wrenches have a blue release collar and R.H. rotation wrap spring wrenches have a grey or black release collar. Collar Chain idler tensioning Wrap spring wrench (L.H. rotation shown) Rotate collar on wrap spring wrench and pull handle to release chain tension. Rotate chain idler into chain and pull handle to tension idler spring.
Machine Operation M0233-01 Model 3700 Sliding Hitch Linkage Axle link Draft link Axle link slide (L.H. shown) 24 Row 30" and 36 Row 20" planters are equipped with sliding axle links which connect R.H. and L.H. draft links to transport axle. Axle links move in a slide on inner side of each draft link when planter folds or unfolds. When axle links reach end of slides, main transport axle is telescoped forward into transport position or rearward into field position.
Machine Operation Model 3700 M0233-01 Hydraulic/Electric Operation Control console switches and tractor’s hydraulic system are used to raise planter to transport position, operate rotate and tongue extension functions, lock and release planter wings, and raise and lower row markers. NOTE: Turn console backlighting OFF during extended periods of non-use using push button switch on back of console.
M0233-01 Machine Operation Model 3700 Hydraulic Drive When stopping in the middle of a field, drive runs a split second after tractor and planter come to a complete stop. Shut master switch OFF before coming to a complete stop to avoid bunching of seeds. To avoid skips starting from a complete stop, lift planter and back-up 4-6 feet, put planter in ground, and accelerate slowly to continue planting.
Machine Operation Model 3700 M0233-01 Transport to Field Sequence Position planter in a relatively flat open area without furrows, etc. SUMMARIZED TRANSPORT TO FIELD SEQUENCE 1. Remove hitch parallel linkage lock pin or lockup. 2. Lower hitch parallel linkage to release wing hooks. NOTICE Unfolding planter without using tractor to assist may cause equipment damage especially in soft conditions or when loaded with seed or fertilizer.
M0233-01 Machine Operation Model 3700 Hitch release from wing hook 2. Hold “ROTATE/TONGUE” switch in “TONGUE” position while operating proper tractor hydraulic control to completely retract hitch parallel linkage cylinder and lower hitch until wing wheels are on ground and hitch has released from hooks on ends of wings. Planter unfolding NOTICE Unfolding planter without using tractor to assist may cause equipment damage especially in soft conditions or when loaded with seed or fertilizer.
Model 3700 Machine Operation M0233-01 Safety lockups in storage position Safety lockups in transport position NOTE: Automatic safety lock will release when planter is raised to remove weight from center lift cylinder lockups. Raising planter too high will reset the mechanism. If this happens, lower machine until hydraulic system stalls against the automatic safety, raise machine slightly to release automatic safety lock and then lower planter. 4.
Machine Operation M0233-01 Model 3700 Catwalk release lever Catwalk and ladder folded Catwalk and ladder unfolded 7. (36 Row 20" only) Pull on catwalk release lever and swing catwalk extension out until it locks into position. Lift and swing over ladder. Field Operation Planters are designed to operate within a speed range of 2 - 8 mph (3 - 13 kph). Higher ground speeds can cause more variation in seed spacing. Speeds above 5.5 mph (8.8 kph) are typically not recommended.
Machine Operation Model 3700 M0233-01 Field to Transport Sequence Position planter in a relatively flat open area without furrows, etc. SUMMARIZED FIELD TO TRANSPORT SEQUENCE 1. 2. 3. 4. 5. Raise and stow catwalk ladder (36 Row 20" ASD only). Install marker lockups. Raise planter to fully extend master/slave cylinders. Install center (slave) lift cylinder lockups. Lower planter onto center lift cylinder lockups.
M0233-01 Machine Operation Model 3700 Row marker safety lockup installed Row marker safety lockup stored 2. Install cylinder lockups on marker cylinders to prevent markers from unfolding when not in use or planter is in transport position. Raising planter 3. Hold RAISE/WING LOCK switch on control console in RAISE while operating proper tractor hydraulic control to raise planter. Planter frame should raise level until lift (master) cylinders at ends of wings are fully extended.
Model 3700 Machine Operation Safety lockups in storage position M0233-01 Safety lockups in transport position NOTICE DO NOT fold planter into transport position without lift cylinder lockups installed or uncontrolled planter settling can damage equipment. 4. Install center (slave) lift cylinder lockups. Install pin assembly to lock each in place. 5. Lower planter onto center lift (slave) cylinder lockups. Planter folding 6.
Machine Operation M0233-01 Model 3700 Wing end hook NOTICE DO NOT LOWER planter frame onto transport axle in folded transport position or transport tires and row units will be damaged. 7. Raise hitch parallel linkage to completely engage wing hooks and completely lift wing wheels off ground. Hitch parallel linkage pin installed Hitch parallel linkage pin stored 8. Install parallel linkage lock pin. 9. Lower parallel link cylinder onto lock pin. 2-21 Rev.
Machine Operation Model 3700 M0233-01 Row Marker Operation DANGER! Contacting or coming close to power lines or other high energy sources will cause death or serious injury. Keep away from power lines or high energy sources at all times. Row marker solenoid valves Marker switch Two solenoid valves on valve block at rear R.H. side of center frame, and a three position selector switch on control console permit operator to lower or raise desired row marker.
M0233-01 Machine Operation Model 3700 Row Marker Speed Adjustment NOTICE Excessive row marker travel speed can damage row markers. Adjust flow controls before row markers are first used. Marker hydraulic system includes two flow control valves. One flow control valve sets lowering speed and one sets raising speed of both markers. Flow controls determine amount of oil flow restriction through valves, varying marker travel speed. Loosen jam nut and turn control clockwise, or IN to slow travel speed.
Machine Operation Model 3700 M0233-01 Row Marker Length And Disc Blade Adjustment 1. Multiply number of rows by the average row spacing in inches to determine total planting width. Row Marker Lengths 24 Row 20" 480" (1,219.2 cm) 24 Row 22" 528" (1,341.12 cm) 24 Row 30" 720" (1,828.8 cm) 36 Row 20" 720" (1,828.8 cm) 2. Lower planter and row marker assembly to ground. 3. Measure from planter center line to a point where blade contacts ground. 4.
Machine Operation M0233-01 Model 3700 EdgeVac System Kinze EdgeVac seed metering system includes seed meters, seed discs, and an air system consisting of a hydraulic driven vacuum fan which draws air through manifolds, hoses, and seed meters on each row unit. WARNING Moving fan blades can cause amputation or severe injury. Never operate vacuum fan with cover removed.
Machine Operation Model 3700 M0233-01 Air Seed Delivery (ASD) System CAUTION Seed flying out of disconnected delivery tube at high velocity can cause injury. Do not disconnect delivery tubes when system is operating. NOTICE Foreign materials can plug system. Make sure seed is clean and free of debris when filling ASD hoppers. NOTICE Do not turn on system with tractor engine at full speed or system damage may occur.
Machine Operation M0233-01 Model 3700 ASD Tanks - Clean Out Chute hooks Cleanout chute storage location Cleanout chute installed 1. Remove ASD tank cleanout chute from storage location under L.H. ASD tank. 2. Position tube of chute under entrainer and attach hooks on each end of entrainment assembly. 3. Open cleanout doors and empty tank. 4. Close all cleanout doors and return cleanout chute to storage location. ASD Scale Package Option NOTICE High-pressure water can damage display.
Model 3700 Machine Operation M0233-01 SETUP ASD SCALE PACKAGE DISPLAY 1. Press SET-UP button. 2. First setup screen displays and ALARM LEVEL box is highlighted. 3. Press SELECT button. 4. Press UP or DOWN arrows to change alarm weight level. Select BACK to save changes. 5. Press UP or DOWN arrows to highlight WEIGHT/ACRE MODE box. Press SELECT button. 6. Press UP or DOWN arrow buttons to toggle between weight or acre mode.
M0233-01 Machine Operation Model 3700 MONITOR SEED LEVELS 1. Main screen displays information for left and right hoppers. 2. Select L or R for individual hopper status information. 3. Select BACK to return to main screen. 4. Press down arrow once or twice for GROSS screen to appear. This provides combined status information for both hoppers. 5. Press down arrow again to return to main screen. ENTER SEED INFORMATION 1. Highlight and select either L (left) or R (right) for the appropriate input screen.
Model 3700 Machine Operation M0233-01 Kinze Cobalt System The Cobalt electronic seed monitor system consists of a tractormounted console, seed tubes with computerized sensors installed in each planter row unit, a primary harness connecting console to planter harness, and a planter harness (junction Y-harness and/or harness extension where applicable), connected to each seed tube sensor. Cobalt monitor is built to withstand harsh environments associated with today’s agricultural industry.
Machine Operation M0233-01 Model 3700 Point Row Clutches L.H. point row clutch switch 10 amp time delay fuse R.H. point row clutch switch 10 amp time delay fuse Point row clutch switch Single point row clutch control box Point row clutch Electric-activated clutches disengage drive on either half of planter for finishing up fields or for long point row situations. Clutch selector switch is located on tractor control box.
Machine Operation Model 3700 M0233-01 Two-Speed Point Row Clutches Drive sprocket Two-speed clutch Decal Driven sprocket (30 tooth overunning) Input from contact drive wheel Two-speed point row clutch Two-speed point row clutch driven sprockets Optional Two-Speed Point Row Clutch Package allows on-the-go population rate adjustment and capability to shut off either half of planter for finishing up fields or for long point row situations.
Machine Operation M0233-01 Model 3700 Piston Pump NOTE: Keep manuals shipped with pump and flow divider with this manual. Piston pump Adjusting delivery rate NOTE: Delivery rate chart in Rate Chart section of this manual provides approximate application rate only. Delivery varies with temperature and fertilizer. Loosen ⅜" lock nut that secures arm with pointer and rotate scale flange with adjustment wrench until pointer is over desired scale setting. Tighten ⅜" lock nut. DO NOT OVERTIGHTEN.
Machine Operation Model 3700 M0233-01 Check Valves New style reparable check valve Old style non-reparable check valve Optional low rate check valves are available for in-line installation between liquid fertilizer piston pump and openers to ensure equal distribution of product at low rates. Check valves eliminate anti-siphon loops. Low-Rate (Pop-Up) Liquid Fertilizer System Check flow out of each row frequently to ensure orifices have not been plugged.
M0233-01 Machine Operation Model 3700 Field Test Perform a field test with any change of field and/or planting conditions, seed size or planter adjustment to ensure proper seed placement and operation of row units. Check planter for front to rear and lateral level operation. See “Level Planter”. Check all row units to be certain they are running level. Row unit parallel arms should be approximately parallel to the ground when planting. Check row markers for proper operation and adjustment.
Machine Operation Model 3700 M0233-01 3. Measure 1∕1000 of an acre. See chart for correct distance for row width being planted. For example, if planting 30" rows 1∕1000 of an acre would be 17' 5". 1∕1000 Acre Seed Population Count Row Width/Distance Row Width Distance 20" 22" 30" 26'2" (797.56 cm) 23'9" (723.9 cm) 17'5" (581.66) NOTE: Seeds may bounce or roll when planting with closing wheels raised and planting depth set shallow affecting seed spacing accuracy. 4.
Machine Operation M0233-01 Model 3700 Field Check Granular Chemical Application Temperature, humidity, speed, ground conditions, flowability of different material, or meter obstructions can affect granular chemical rate of delivery. WARNING Agricultural chemicals can cause death or serious injury to persons, animals, and plants or seriously damage soil, equipment, or property. Read and follow all chemical and equipment manufacturers labels and instructions.
This page intentionally left blank.
Row Unit Operation M0233-01 Planting Depth Planting depth adjustment handle Planting depth is maintained by adjustable row unit gauge wheels. Depth adjustment range is approximately ½" to 3½". 1. Raise planter to remove weight from wheels. 2. Push down on depth adjustment handle and reposition it forward to decrease or rearward to increase planting depth. Initially adjust all units to the same setting. 3.
Row Unit Operation Model 3700 M0233-01 Drag Closing Attachment Drag closing attachment pulls loose soil over seed trench. NOTE: Use of a seed firming wheel or other seed firming device is recommended with drag closing attachment. Eccentric bushing Front and rear adjustment is made using slotted holes in blades. Adjust all rows the same. Wheel arm stop eccentric bushings provide lateral adjustment. Use a ¾" wrench to loosen closing wheel arm to wheel arm stop hardware.
M0233-01 Row Unit Operation Model 3700 Seed Hoppers Mechanical seed hopper has a capacity of 1.9 bushels. EdgeVac seed hopper has a capacity of 1.75 bushels. Use clean seed and make certain there are no foreign objects inside when filling seed hopper. Replace hopper lids after hoppers are filled to prevent accumulation of dust or dirt in seed meter which can cause premature wear. See “Finger Pickup Seed Meter” , “Brush-Type Seed Meter”, or EdgeVac Seed Meter".
Model 3700 Row Unit Operation M0233-01 Row Unit Chain Routing Row unit drive chains must be properly tensioned and aligned for proper operation and to minimize wear. Inspect and replace weak, worn or broken springs, idlers, and idler bushings. Mechanical pull row unit meter drive EdgeVac pull row unit meter drive Direction of travel Closed end NOTE: Install connector link with closed end facing direction of travel.
Row Unit Operation M0233-01 Model 3700 Quick Adjustable Down Force Springs Option (Standard or Heavy Duty) Standard and heavy duty quick adjustable down force springs are available in increase penetration in hard soil and keep row unit from bouncing in rough field conditions. Two springs per row, one on each side parallel arms, are used unless equipped with row unit mounted no till coulters. Row unit mounted no till coulters require four springs per row.
Row Unit Operation Model 3700 M0233-01 Pneumatic Down Pressure Row unit down pressure can be adjusted on-the-go as field conditions change. A cab-mounted control box adjusts pressure (Older models may have a digital readout). Two planter-mounted 12 VDC air compressors with 3 gallon capacity air tank supplies air for the down pressure system.
Row Unit Operation M0233-01 Model 3700 FIELD OPERATION NOTE: Adjust down pressure with planter lowered and row openers in ground for most accurate adjustment. Pressure can be adjusted from tractor using control console, or at planter using manual control valves on compressor assembly. Pressure gauge Shutoff valve Increase pressure Decrease pressure Control console Air compressor assembly controls ADJUST DOWN PRESSURE FROM CAB Push toggle switch left to increase or right to decrease pressure.
Row Unit Operation Model 3700 M0233-01 Brush-Type Seed Meter Crop Upper Seed Size Disc Color-Code Brush Range (Disc Part No.) Retainer Cells *Lubricant Soybean Black (GA5794) GD11122 60 2200 to 4000 seeds/lb. Graphite Talc Specialty Soybean Dark Blue (GA6184) GD11122 48 1400 to 2200 seeds/lb. Graphite Talc Small Milo/Grain Sorghum Red (GA5982) GD8237 30 14,000 to 20,000 seeds/lb. Talc Large Milo Grain Sorghum Light Blue (GA6187) GD8237 30 10,000 to 16,000 seeds/lb.
Row Unit Operation M0233-01 Model 3700 Turn seed disc counterclockwise when installing on meter hub while tightening two wing nuts that retain disc. Seed disc should have slight resistance when rotated counterclockwise after wing nuts are tight. Brush-type seed meter attaches to seed hopper same as finger pickup seed meter. Secure to bottom of seed hopper with two 5∕16" thumbscrews. Tighten thumbscrews slightly with pliers. DO NOT OVER TIGHTEN.
Row Unit Operation Model 3700 M0233-01 EdgeVac Seed Meters Crop Seed Size Range Singulator Brush Setting Vacuum Setting (H2O) 35-70 lbs./80k 5-7 18-20 Graphite Talc 4, 5 2210-4200 seeds/lb. 9 18 Graphite Talc 1, 4, 5 35-70 lbs./80k 5-7 18-20 Graphite Talc 4, 5 2210-4200 seeds/lb. 9 18 Graphite Talc 1, 4, 5 60 2200-4000 seeds/lb. 5 10 Graphite Talc 1 120 2200-4000 seeds/lb. 5 10 Graphite Talc - 60 10,000 - 20,000 seeds/lb. 3-6 20 Talc 1, 2 3800-4400 seeds/lb.
M0233-01 Row Unit Operation Model 3700 NOTES: 1. Requires use of seed meter baffle. 2. Requires use of cleanout brush. 3. Requires use of cleanout brush w/ball-type ejector. 4. Flat seeds may require higher vacuum level. 5. Larger seeds may require lower singulator brush setting. Smaller seeds may require higher setting. NOTE: See “EdgeVac General Planting Rate Information” and “Check Seed Population” pages for more information.
Row Unit Operation Model 3700 M0233-01 w/Ball-Type Ejector Seed baffle NOTE: Damaged seed or seed containing foreign material will cause plugging of seed disc orifices and require more frequent seed meter cleanout to prevent underplanting. SEED BAFFLE Seed baffle prevents excessive seed in meter from restricting air flow though seed. Used with 60 Cell Milo/Grain Sorghum Disc, 60 Cell Soybean Disc, 120 Cell High-Rate Soybean Disc, 39 Cell and 24 Cell Popcorn Discs, and 80 Cell Sugar Beet Disc.
M0233-01 Row Unit Operation Model 3700 4. Adjust vacuum level to initial setting according to tables on page. NOTE: Vacuum reading will be much lower when seed disc cells are empty. Load all seed cells before setting vacuum level. NOTE: Operate vacuum fan 3-5 minutes to bring oil up to normal operating temperature prior to making final vacuum level adjustment. 5. Perform optional seed disc fill check.
Model 3700 Row Unit Operation M0233-01 Additives The use of graphite is recommended to promote seed flow, provide lubrication for the seed meter and to help dissipate static charge buildup. Among the available dry seed lubricants graphite is the most effective and easiest to use and it requires no mechanical agitation Lubricant Application Rate Graphite Conventional Hoppers ASD Hoppers 1 Tbs.
Row Unit Operation M0233-01 Frame Mounted Coulter (Pull Row) Model 3700 Spring adjustment bolt Frame mounted coulters with 1" bubbled, 1" fluted (8 flutes) or ¾" fluted (13 flutes) blades are used on pull row units only. Spring anchor bar Springs provide down pressure on coulter for maximum penetration while exerting less shock load on row unit. Initial coulter blade location is in top hole. Relocate blade to one of lower two holes (1" increments) as wear occurs or for deeper blade operation.
Model 3700 Row Unit Operation M0233-01 Row Unit Mounted Disc Furrower (Pull Row) Disc furrowers are used to clear crop residue, dirt clods, and dry soil from in front of row units for a clean and smooth seed bed. The disc furrower may be equipped with 12" solid blades or 12" notched blades. Notched blades are for heavier residue conditions and cut crop residue and move it aside to prevent plugging or pushing.
Row Unit Operation M0233-01 Model 3700 Row Unit Mounted Residue Wheel Row unit mounted residue wheels are used on pull and push row units. Row Unit Mounted Residue Wheel Two adjustable springs on each residue wheel parallel links provide down force adjustment. Position 1 provides minimum down pressure and position 3 maximum down pressure. Position 2 Position 1 (Least) Position 3 (Most) Additional uplift or float Raise row unit and reposition springs to adjust down pressure.
Row Unit Operation Model 3700 M0233-01 Row Unit Mounted No Till Coulter Row unit mounted no till coulters with 1" bubbled, 1" fluted (8 flutes) or ¾" fluted (13 flutes) blades may be used on pull row units and push row units (¾" fluted shown). Four quick adjustable down force springs are required per row when using row unit mounted no till coulters. See “Quick Adjustable Down Force Springs Options”. Align coulter blade to row unit double disc openers.
Row Unit Operation M0233-01 Model 3700 Granular Chemical Hopper and Drive WARNING Agricultural chemicals can cause death or serious injury to persons, animals, and plants or seriously damage soil, equipment, or property. Read and follow all chemical and equipment manufacturers labels and instructions. The granular chemical hopper has a 1.4 cubic feet capacity. Make sure no foreign objects get into hopper when it is being filled.
Row Unit Operation Model 3700 M0233-01 Granular Chemical Banding Options Granular chemical banding options allow 4½" slope-compensating banding, straight drop in-furrow placement or 14" rear banding. NOTE: Granular chemical rear bander is not compatible with covering discs/single press wheel option.
Rate Charts M0233-01 Model 3700 General Planting Rate Information These planting rate charts apply to KINZE Model 3700 planters. NOTICE Sprocket combinations in these charts are for average conditions. Changes in sprocket combinations may be required for desired planting population. ALWAYS MAKE FIELD CHECKS TO BE SURE YOU ARE PLANTING AT DESIRED RATE. NOTICE Seed additives added in the hopper may affect finger pickup seed meter performance and accelerate wear.
Rate Charts Model 3700 M0233-01 PLANTING RATES FOR FINGER PICKUP SEED METERS (STANDARD DRIVE) APPROXIMATE SEEDS/ACRE FOR VARIOUS ROW WIDTHS 20" Rows 24,279 25,178 26,147 27,135 27,192 28,140 28,325 29,222 29,556 30,392 31,656 32,847 33,033 34,064 34,275 35,375 35,546 35,703 35,780 36,789 36,912 37,026 37,133 38,322 38,388 38,450 38,507 38,561 39,989 41,469 41,526 41,655 41,727 43,064 43,187 43,466 44,693 44,787 44,987 45,204 46,653 46,943 48,407 48,681 50,511 52,616 54,102 54,720 56,454 56,825 58,806 58
Rate Charts M0233-01 Model 3700 PLANTING RATES FOR BRUSH-TYPE SEED METERS (STANDARD DRIVE) APPROXIMATE SEEDS/ACRE FOR VARIOUS ROW WIDTHS Transmission Sprockets Drive 17 17 17 19 19 17 17 19 19 23 19 24 24 17 24 26 24 26 23 27 24 25 19 27 28 23 28 24 25 23 26 27 28 26 27 28 Driven 28 27 26 28 27 24 23 25 24 28 23 28 27 19 26 28 25 27 23 26 23 23 17 24 24 19 23 19 19 17 19 19 19 17 17 17 60 Cell Soybean Or High-Rate Milo/Grain Sorghum 20" Rows 22" Rows 30" Rows 121,392 110,062 80,928 125,889 114,139 83,9
Model 3700 Rate Charts M0233-01 PLANTING RATES FOR BRUSH-TYPE SEED METERS (STANDARD DRIVE) APPROXIMATE SEEDS/ACRE FOR VARIOUS ROW WIDTHS Transmission Sprockets Drive 17 17 17 19 19 17 17 19 19 23 19 24 24 17 24 26 24 26 23 27 24 25 19 27 28 23 28 24 25 23 26 27 28 26 27 28 Driven 28 27 26 28 27 24 23 25 24 28 23 28 27 19 26 28 25 27 23 26 23 23 17 24 24 19 23 19 19 17 19 19 19 17 17 17 36 Cell Acid-Delinted Large Average 30 Cell Milo/Grain Sorghum Or Average Cotton Seed Acid-Delinted Cotton Seed 20" Ro
Rate Charts M0233-01 Model 3700 PLANTING RATES FOR BRUSH-TYPE SEED METERS (STANDARD DRIVE) APPROXIMATE HILLS/ACRE FOR VARIOUS ROW WIDTHS Due to variations in cotton seed size, meters equipped with the 12 cell acid-delinted hill-drop cotton discs will plant from 3 to 6 seeds per cell. Select proper disc for seed size range to be planted. To determine planter transmission setting, determine desired hill spacing and select the transmission ratio closest to the hill spacing in inches on the chart.
Rate Charts Model 3700 M0233-01 Edgevac Planting Rates for Corn / Popcorn 39 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 34,813 36,102 37,491 38,991 39,455 40,615 40,916 42,381 42,490 44,096 44,189 45,730 46,031 47,489 48,032 49,388 51,303 51,446 53,380 53,683 55,357 55,701 57,339 57,764 58,144 59,786 60,343 62,277 62,385 62,663 64,984 67,391 67,484 67,810 69,983 70,183 70,635 72,629 73,107 73,460 75,815 76,286 78,665 79,11
Rate Charts M0233-01 Model 3700 Edgevac PLANTING RATES FOR CORN / POPCORN 39 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 44,307 45,948 47,716 49,624 50,215 51,692 52,075 53,940 54,078 56,123 56,241 58,201 58,584 60,440 61,131 62,858 65,295 65,477 67,938 68,323 70,454 70,892 72,977 73,518 74,001 76,091 76,800 79,261 79,399 79,753 82,707 85,770 85,888 86,303 89,069 89,324 89,899 92,438 93,046 93,495 96,492 97,091 100,119 100,
Rate Charts Model 3700 M0233-01 Edgevac Planting Rates for Low-Rate Corn / Popcorn 24 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 21,423 22,217 23,071 23,994 24,280 24,994 25,179 26,081 26,148 27,136 27,193 28,141 28,326 29,224 29,558 30,393 31,571 31,659 32,849 33,035 34,066 34,277 35,286 35,547 35,781 36,791 37,134 38,324 38,391 38,562 39,990 41,471 41,528 41,729 43,067 43,190 43,468 44,695 44,989 45,206 46,655 46,945 48,
Rate Charts M0233-01 Model 3700 Edgevac PLANTING RATES FOR LOW-RATE CORN / POPCORN 24 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE HILLS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 27,134 28,139 29,221 30,390 30,752 31,656 31,891 33,033 33,117 34,370 34,442 35,643 35,877 37,013 37,437 38,494 39,987 40,098 41,605 41,841 43,146 43,414 44,691 45,022 45,318 46,598 47,032 48,540 48,624 48,841 50,650 52,526 52,598 52,852 54,546 54,702 55,054 56,609 56,981 57,257 59,092 59,459 61,
Rate Charts Model 3700 M0233-01 Edgevac Planting Rates for Soybean and Milo / Grain Sorghum 60 Cell Discs 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 53,558 55,542 57,678 59,985 60,700 62,485 62,948 65,202 65,369 67,841 67,984 70,353 70,816 73,059 73,895 75,982 78,928 79,148 82,123 82,589 85,165 85,694 88,214 88,867 89,452 91,978 92,835 95,810 95,977 96,405 99,976 103,679 103,821 104,323 107,666 107,974 108,669 111,738 112,473 113,01
Rate Charts M0233-01 Model 3700 Edgevac PLANTING RATES FOR SOYBEAN AND MILO / GRAIN SORGHUM 60 CELL DISCS 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 68,165 70,690 73,409 76,345 77,254 79,526 80,115 82,984 83,197 86,343 86,525 89,541 90,130 92,984 94,048 96,704 100,454 100,733 104,520 105,113 108,391 109,065 112,272 113,104 113,848 117,063 118,153 121,940 122,152 122,698 127,242 131,955 132,136 132,774 137,030 137,421 138,306 142,212
Rate Charts Model 3700 M0233-01 Edgevac Planting Rates for Soybean 60 Cell Disc 44 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 107,110 111,077 115,349 119,963 121,391 124,961 125,887 130,394 130,729 135,672 135,958 140,697 141,623 146,109 147,780 151,953 157,846 158,284 164,235 165,166 170,318 171,376 176,416 177,723 178,892 183,943 185,657 191,607 191,941 192,797 199,938 207,343 207,628 208,631 215,318 215,933 217,324 223,460 224,930 2
Rate Charts M0233-01 Model 3700 Edgevac Planting Rates for High-Rate Soybean 120 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 107,117 111,084 115,357 119,971 121,399 124,970 125,895 130,403 130,738 135,681 135,967 140,707 141,632 146,118 147,790 151,963 157,857 158,295 164,246 165,177 170,329 171,387 176,428 177,735 178,904 183,955 185,669 191,620 191,954 192,810 199,952 207,357 207,642 208,645 215,333 215,948 217,339 223,47
Rate Charts Model 3700 M0233-01 Edgevac PLANTING RATES FOR HIGH-RATE SOYBEAN 120 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 136,331 141,380 146,818 152,690 154,508 159,052 160,231 165,968 166,393 172,685 173,049 179,081 180,259 185,969 188,097 193,408 200,908 201,466 209,040 210,226 216,783 218,129 224,545 226,208 227,696 234,125 236,306 243,880 244,305 245,395 123,937 128,527 133,471 138,809 140,462 144,593 145,664 150,8
Rate Charts M0233-01 Model 3700 Edgevac Planting Rates for Hill-Drop Cotton (3 Seeds per Cell), 20 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE HILLS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows Transmission Sprockets Recomm. Speed Average Seed Spacing Drive Driven Range (MPH) In Inches 17,853 16,230 11,902 15 28 4 to 6 17.6 18,514 16,831 12,343 15 27 4 to 6 16.9 19,226 17,478 12,817 15 26 4 to 6 16.3 19,995 18,177 13,330 15 25 4 to 6 15.
Rate Charts Model 3700 M0233-01 Edgevac PLANTING RATES FOR HILL-DROP COTTON (3 SEEDS PER CELL), 20 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE HILLS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows Transmission Sprockets Recomm. Speed Average Seed Spacing In Drive Driven Range (MPH) Inches 22,722 20,656 15,148 15 28 4 to 6 13.8 23,563 21,421 15,709 15 27 4 to 6 13.3 24,470 22,245 16,313 15 26 4 to 6 12.8 25,448 23,135 16,966 15 25 4 to 6 12.
Rate Charts M0233-01 Model 3700 Edgevac Planting Rates for Cotton / Small Dry Edible Bean/Sunflower, 54 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows Transmission Sprockets Recomm. Speed Average Seed Spacing Drive Driven Range (MPH) In Inches 48,203 43,821 32,135 15 28 4 to 6 6.5 49,988 45,444 33,325 15 27 4 to 6 6.3 51,911 47,191 34,607 15 26 4 to 6 6.0 53,987 49,079 35,991 15 25 4 to 6 5.
Rate Charts Model 3700 M0233-01 Edgevac PLANTING RATES FOR COTTON / SMALL DRY EDIBLE BEAN / SUNFLOWER, 54 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 61,349 63,621 66,068 68,711 69,529 71,574 72,104 74,685 74,877 77,708 77,872 80,587 81,117 83,686 84,644 87,033 90,409 90,660 94,068 94,602 97,552 98,158 101,045 101,794 102,463 105,356 106,338 109,746 109,937 110,428 114,518 118,759 118,922 119,497 123,327 123,679 124,476 127
Rate Charts M0233-01 Model 3700 Edgevac Planting Rates for Sunflower, 54 Cell Disc 15 TOOTH CONTACT WHEEL DRIVE SPROCKET / 19 TOOTH REVERSER DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 22,281 23,106 23,995 24,955 25,252 25,995 26,187 27,125 27,194 28,223 28,282 29,268 29,461 30,394 30,742 31,609 32,835 32,927 34,164 34,358 35,430 35,650 36,698 36,970 37,213 39,858 38,621 39,858 39,928 40,106 41,591 43,132 43,191 43,400 44,791 44,919 45,208 46,485 46,790 47
Rate Charts Model 3700 M0233-01 Edgevac Planting Rates for Large Dry Edible Bean, 54 Cell Disc 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 48,203 49,988 51,911 53,987 54,630 56,236 56,653 58,681 58,832 61,057 61,185 63,318 63,735 65,753 66,506 68,383 71,035 71,233 73,911 74,330 76,648 77,124 79,393 79,981 80,507 82,780 83,551 86,229 86,379 86,765 89,978 93,311 93,439 93,890 96,900 97,176 97,802 100,564 101,226 101,715 104,975 105,627
Rate Charts M0233-01 Model 3700 Edgevac PLANTING RATES FOR LARGE DRY EDIBLE BEAN 54 CELL DISC 28 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS / ACRE FOR VARIOUS ROW WIDTHS 20" Rows 22" Rows 30" Rows 61,349 63,621 66,068 68,711 69,529 71,574 72,104 74,685 74,877 77,708 77,872 80,587 81,117 83,686 84,644 87,033 90,409 90,660 94,068 94,602 97,552 98,158 101,045 101,794 102,463 105,356 106,338 109,746 109,937 110,428 114,518 118,759 118,922 119,497 123,327 123,679 124,476 127,990 128,832 129,455 1
Model 3700 Rate Charts M0233-01 PLANTING RATES FOR (EDGEVAC) SUGAR BEETS 80 CELL DISC 22 TOOTH CONTACT WHEEL DRIVE SPROCKET APPROXIMATE SEEDS/ACRE FOR VARIOUS ROW WIDTHS Transmission Sprockets Average Seed Average Seed Recomm. Speed Spacing In Inches Spacing In Inches 20" Rows 22" Rows 30" Rows Drive Driven Range (MPH) (20" and 22" Rows) (30" Rows) 71,412 64,920 47,608 15 28 4 to 6 3.2 4.4 74,055 67,323 49,370 15 27 4 to 6 3.1 4.2 76,905 69,913 51,270 15 26 4 to 6 3.0 4.
Rate Charts M0233-01 Model 3700 PLANTING RATES FOR (EDGEVAC) SUGAR BEETS 80 CELL DISC 15 TOOTH CONTACT WHEEL DRIVE SPROCKET/19 TOOTH REVERSER DRIVEN SPROCKETS APPROXIMATE SEEDS/ACRE FOR VARIOUS ROW WIDTHS Recomm. Average Seed Average Seed Speed Range Spacing In Inches Spacing In Inches Drive Driven (MPH) (20" and 22" Rows) (30" Rows) 33,009 30,008 22,006 15 28 4 to 6 7.0 9.5 34,231 31,119 22,821 15 27 4 to 6 6.7 9.2 35,548 32,316 23,699 15 26 4 to 6 6.5 8.9 36,970 33,609 24,647 15 25 4 to 6 6.2 8.
Rate Charts Model 3700 M0233-01 Liquid Fertilizer Piston Pump Application Rates GALLONS PER ACRE Model NGP-6055 Pumps With 18 Tooth Contact Wheel Drive Sprocket (Planter equipped with two piston pumps.) Pump Setting 24 Row 30" 2 3 4 5 6 7 8 9 10 9.2 13.6 18.2 22.8 27.4 32.0 36.6 41.2 45.6 Model NGP-7055 Pumps With 18 Tooth Sprocket and Ground Drive (Planter equipped with two piston pumps.) Pump Setting 24 Row 30" 2 3 4 5 6 7 8 9 10 7.4 11.1 14.8 18.5 22.1 25.8 29.5 33.
Rate Charts M0233-01 Model 3700 High-Rate Liquid Fertilizer Piston Pump Application Rates GALLONS PER ACRE Model NGP-6055 Piston Pump (Using Flow Dividers) With 18 Tooth Sprocket (Planter Equipped With Two Piston Pumps) Below charts for planters equipped with 37" drive wheel and 15" contact wheel, based on 47.125" forward travel per contact wheel revolution, 48 tooth drive sprocket, and 18 tooth driven sprocket on metering pump. Chart is based on average wheel slippage and liquid viscosities.
Rate Charts Model 3700 M0233-01 LOW-Rate (POP-Up) Liquid Fertilizer Piston Pump Application Rates GALLONS PER ACRE Model NGP-6055 Piston Pump (Using Orifices) With 18 Tooth Sprocket (Planter Equipped With One Piston Pump) Below charts for planters equipped with 37" drive wheel and 15" contact wheel, based on 47.125" forward travel per contact wheel revolution, 23 tooth drive sprocket, and 18 tooth driven sprocket on metering pump. Chart is based on average wheel slippage and liquid viscosities.
Rate Charts M0233-01 Model 3700 Dry Insecticide Application Rates APPROXIMATE POUNDS/ACRE AT 5 MPH (8 KPH) Meter Setting 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 20" Rows CLAY GRANULES 7.4 8.1 9.2 10.4 11.6 12.8 14.4 16.1 17.1 19.7 21.3 23.3 24.6 25.8 28.2 31.4 34.5 36.2 38.1 41.7 44.4 SAND GRANULES 4.4 7.4 8.0 9.5 11.7 13.4 15.3 16.8 18.9 21.2 23.3 26.3 29.1 32.7 36.5 38.6 41.4 44.4 48.0 51.6 55.4 22" Rows 30" Rows 6.
Rate Charts Model 3700 M0233-01 Dry Herbicide Application Rates APPROXIMATE POUNDS/ACRE AT 5 MPH (8 KPH) CLAY GRANULES Meter Setting 20" Rows 22" Rows 30" Rows 10 7.1 6.4 4.7 11 7.8 7.1 5.2 12 8.7 7.9 5.8 13 9.8 8.8 6.5 14 11.0 9.9 7.3 15 12.3 11.2 8.2 16 13.5 12.2 9.0 17 14.9 13.5 9.9 18 16.1 14.6 10.7 19 17.4 15.8 11.6 20 18.9 17.1 12.6 21 20.4 18.5 13.6 22 21.9 19.9 14.6 23 23.6 21.4 15.7 24 25.5 23.1 17.0 25 27.2 24.6 18.1 26 29.
Lubrication and Maintenance M0233-01 Model 3700 Lubrication Following pages show locations of all lubrication points. Proper lubrication of moving parts helps ensure efficient operation of your Kinze planter and prolongs the life of friction producing parts. Lubrication Symbols Lubricate at frequency indicated with SAE multipurpose grease. Lubricate at frequency indicated with high quality SAE 10 weight oil or spray lubricant.
Lubrication and Maintenance Model 3700 M0233-01 Drive Chains Lubricate all transmission and drive chains daily with a high quality chain lubricant. Extreme operating conditions such as dirt, temperature, or speed may require more frequent lubrication. If a chain becomes stiff, it should be removed, soaked, and washed in solvent to loosen and remove dirt from joints. Soak chain in oil so lubricant can penetrate between rollers and bushings.
M0233-01 Lubrication and Maintenance Optional piston pump drive chain Model 3700 Inner module (point row clutch) drive chains Row Unit Electric Clutches 5-3 Rev.
Model 3700 Lubrication and Maintenance M0233-01 Bushings Lubricate bushings at frequency indicated. Check each bolt for proper torque. If bolt is loose, removed it and inspect bushing for cracks and wear. Replace bushing if necessary. Use only hardened flat washers. Replace damaged flat washers with proper part. Torque hardware to 130 ft-lb (176.2 N-m).
M0233-01 Lubrication and Maintenance Model 3700 PTO Shaft Coupling Clean and grease PTO shaft coupling each time pump is installed. Apply coating of high-speed industrial coupling grease, such as Chevron® Coupling Grease meeting AGMA CG-1 and CG-2 Standards to extend shaft spline life. PTO pump installed Wrap Spring Wrench Assembly Wrap spring wrench components may require occasional lubrication to operate correctly using a high quality spray lubricant.
Lubrication and Maintenance Model 3700 M0233-01 Grease Fittings WARNING Uncontrolled machine movement can crush or cause loss of control resulting in death, serious injury, or damage to property and equipment. Install all safety lockup devices before working under or transporting this equipment. Parts equipped with grease fittings should be lubricated at frequency indicated with an SAE multipurpose grease. Clean fitting thoroughly before using grease gun.
M0233-01 Lubrication and Maintenance Model 3700 3. Upper and lower hitch linkage (2 per link) 4. Row Marker Assemblies (11 per side) (General locations shown) 5. Seed rate transmission assembly idler pivot (1 per assembly) 6. Wing pivot knuckle (3 per knuckle on horizontal shaft) 7. Link assemblies (1 per assembly) Front wear pads (4) 8. Axle link assemblies (1 per assembly) Rear wear pads (2 sets - 16) 5-7 Rev.
Model 3700 Lubrication and Maintenance 9. Wheel module lift cylinder mount (1 per wheel module) M0233-01 10. Wing pivot knuckle - 1 per knuckle on shaft Helper cylinders (1 per cylinder) Annually Annually 11. Transport wheel bearing (1 per wheel hub) 12. Swivel block (1) 13. Rear trailer hitch pivot (2) 14. 36 Row ASD catwalk extension pivots (2) 5-8 Rev.
M0233-01 Lubrication and Maintenance Frame Mounted Coulter (1 per arm) Model 3700 Notched single disc opener (1 per arm) Gauge wheel arms (2) Seals in gauge wheel arm are installed with lip facing out to allow grease to purge dirt away from seal. Pump grease into arm until fresh grease appears between washers and arm. Piston pump L.H. side (1) Fill until grease seeps out of bottom drain hole. Piston pump R.H. side (3) 5-9 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Mounting Bolts and Hardware Before operating planter for the first time, check all hardware is tight. Check all hardware again after first 50 hours of operation and beginning of each planting season. All hardware used on the Kinze planter is Grade 5 (high strength) unless otherwise noted. Grade 5 cap screws are marked with three radial lines on the head. Hardware must be replaced with equal size, strength, and thread type.
M0233-01 Lubrication and Maintenance TORQUE VALUES- Pneumatic Down Pressure Diameter Torque Value ⅛" NPT 120 in-lb Maximum ½"-13 180 in-lb Maximum ¾"-16 180 in-lb Maximum NOTE: Use these torque values with pneumatic down pressure components.
Lubrication and Maintenance Model 3700 M0233-01 Tire Pressure WARNING Explosive separation of rim and tire can cause death or serious injury. Overinflation, rim and tire servicing, improper use of rims and tires, worn, or improperly maintained tires could result in a tire explosion. • Maintain proper tire pressure. Inflating a tire above or below the recommended pressure can cause tire damage. • Mount tires only by properly trained personnel using proper equipment.
Lubrication and Maintenance M0233-01 Model 3700 Finger Pickup Seed Meter Inspection/Adjustment Brush attachment screw Baffle attachment to meter. Finger tabs should contact carrier plate in this area. Finger tabs should raise in this area. Meter attachment to hopper. Removing meter and baffle Proper finger operation 1. Remove two thumbscrews and meter from seed hopper and remove three cap screws and baffle from meter assembly. 2.
Model 3700 Lubrication and Maintenance M0233-01 4. Remove springs from fingers and remove finger from holder by lifting it out of friction fit slot. Life expectancy of these parts is about 600-900 acres per row of operation under average conditions. 5. Reassemble meter in reverse order after cleaning and replacing defective parts. Make sure open end of spring loop is toward inside of finger holder when replacing fingers. 6.
Lubrication and Maintenance M0233-01 Belt housing cover Cap screw Model 3700 Rotation Idler mounting bolt Belt idler Centering belt housing cover Remove four cap screws around edge of housing cover and nut from belt idler mounting bolt. Paddles must be correctly oriented as shown above If belt is replaced. A diagram molded into drive sprocket shows correct orientation. NOTICE Do not over-tighten hardware or components may be damaged. Reinstall housing cover. DO NOT TIGHTEN hardware.
Lubrication and Maintenance Model 3700 M0233-01 Brush-Type Seed Meter Maintenance Meter housing Stainless steel wear band Seed disc Upper brush Lower brush Brush-type seed meter seed disc installed Upper brush retainer Brush-type seed meter parts Use clean, high quality seed. Damaged or cracked seed, hulls, or foreign materials can become lodged in upper brush and greatly reduce meter accuracy.
M0233-01 Lubrication and Maintenance UPPER BRUSH Model 3700 Upper brush Upper brush holds seed in seed disc pocket in seed retention area. Brush must apply enough pressure against seed in seed disc pocket as disc rotates through seed retention area to prevent seed from dropping out of disc pocket. A damaged spot, excessive brush wear, or foreign material lodged in brush may greatly reduce meter performance.
Model 3700 Lubrication and Maintenance M0233-01 EdgeVac Seed Meter Maintenance Singulator brush Air inlet screens Vacuum cover Crowder brush Wall brush Before each planting season inspect seed discs, singulator brush, crowder brush, wall brush, and air inlet screens and clean or replace as needed. Use clean, high quality seed for maximum meter accuracy. Damaged or cracked seed, hulls, and foreign material may become lodged in seed disc orifices and greatly reduce meter accuracy.
M0233-01 Lubrication and Maintenance Model 3700 Gauge Wheel Adjustment Machine bushings Shim gauge wheel to lightly contact opener disc blade. Check adjustment in field position. Gauge wheel adjustment Gauge wheels should lightly contact opener blades to prevent accumulation of dirt or trash. Gauge wheels and opener blades should turn with only slight resistance. Add or remove machine bushings between shank and gauge wheel arm to adjust clearance between gauge wheels and opener blades.
Model 3700 Lubrication and Maintenance M0233-01 Gauge Wheel Arm Bushing/Seal Replacement Gauge wheel arm bushings/seals Seal Bushing Seal Bushing NOTE: Gauge Wheel Arm Bushing and Seal Driver Kit (G1K296) is available through your Kinze Dealer. 1. Remove gauge wheel from arm. 2. Remove gauge wheel arm from shank assembly. 3. Remove seal and bushing and discard. Clean and dry inner bore. 4. Drive/press replacement bushing inside bore of arm to a depth of .125" below flush. 5.
Lubrication and Maintenance M0233-01 Model 3700 15" Seed Opener Disc Blade/Bearing Assembly NOTICE Excessive blade contact may result in premature disc opener bearing/hub failures and excessive wear on seed tube guard/inner scraper. When properly adjusted, if one blade is held in fixed position, opposite blade should rotate with less than 5 pounds force at outer edge of blade. Maintain approximately 1" ± ½" of blade-to-blade contact to properly open and form seed trench.
Lubrication and Maintenance Model 3700 M0233-01 Seed Tube Guard/Inner Scraper Seed tube guard protects seed tube and acts as inner scraper for seed opener disc blades. Remove seed tube and check for wear. Excessive wear on seed tube indicates a worn seed tube guard. Replace seed tube guard if it measures ⅝" or less at lower end. A new seed tube guard measures approximately ⅞".
M0233-01 Lubrication and Maintenance Model 3700 Row Unit Mounted Disc Furrower Lubricate bushings in support arm mounting bracket at frequency indicated in Lubrication of this section. Check each bolt for proper torque. If bolt is loose, it should be removed and bushing inspected for cracks and wear. Replace bushings as necessary. NOTE: Use only hardened flat washers. Replace damaged flat washers with proper part. Torque bolts to 130 ft-lb (176.2 N-m). Blade hubs are equipped with sealed bearings.
Lubrication and Maintenance Model 3700 M0233-01 Granular Chemical Attachment Before storing planter, disengage granular chemical drive by rotating throwout knob ¼ turn counterclockwise. Remove drive chain and empty and clean all granular chemical hoppers. Clean drive chains and coat them with a rust preventive spray or submerge chains in oil. Inspect and replace worn or broken parts. Disengage Install hoppers and chains. Check chain alignment.
Lubrication and Maintenance M0233-01 Model 3700 Single and Two-Speed Point Row Clutch Maintenance Point row clutch is permanently lubricated and sealed and requires no periodic maintenance. Two-speed point row clutch is similar in design and operation to standard point row clutch except for two-speed function.
Lubrication and Maintenance Model 3700 M0233-01 TESTING AND FUSE REPLACEMENT Control box main fuse L.H. point row clutch R.H. point row clutch Control box main fuse L.H. reduced rate L.H. point row clutch R.H. reduced rate Single speed point row clutch control box (Front View) R.H. point row clutch Two- speed point row clutch control box (Rear view) NOTE: Replace all point row fuses with MDL 10 amp slow blow fuses.
Lubrication and Maintenance M0233-01 Model 3700 Planter Mounted Pump Drive and Oil Cooler Oil filter location Oil cooler location NOTICE Clean and grease PTO shaft coupling with high-pressure industrial coupling grease (Chevron® coupling grease or equivalent) meeting AGMA CG-1 and CG-2 Standards each time driveshaft is installed or premature wear and equipment failure can occur. NOTE: Periodically check and clean oil coolers. 1. Replace 10-micron spin-on filters on each wing annually. 2.
Model 3700 Lubrication and Maintenance M0233-01 Check Valve A check valve is located in each vacuum fan motor block assembly and operates as a return line check to prevent vacuum fan motor reverse operation. Check valves are also located in valve block on left wing and trap oil flow in planter’s lift system to keep toolbar level during field operation. Another check valve is located in junction block on left wing of planter on 24 Row 30" and 36 Row 20" sizes.
Lubrication and Maintenance M0233-01 Model 3700 Coil Solenoid Valve Solenoid valve consists of a chambered body with an electric coil actuated cartridge valve. If solenoid or solenoids fail to operate, first determine if problem is electrical or hydraulic. If valve is working properly, a click will be heard when solenoid coil is energized and valve stem opens. If no sound is heard, check solenoid coil by touching top of coil housing with a metallic object such as a pliers or screwdriver.
Lubrication and Maintenance Model 3700 M0233-01 Stroke Limiter (Height Stop) Valve Adjustment Field turn around height of toolbar should measure 39"-41" from ground if stroke limiter valve is correctly adjusted. 1. Lower planter to ground and hold hydraulic lever for 15-20 seconds to rephase system. Detent arm Pivot shaft Rod assembly Stroke limiter valve 15½" Fr o nt 2. Check rod assembly adjustment bolt is set at 15¾" pin to pin when planter is fully lowered. Adjust as needed.
Lubrication and Maintenance M0233-01 Model 3700 Detent Lever (Lowering Control) Valve Adjustment Center of planter should drop until toolbar is level and then entire planter should lower evenly when lowering planter for field operation from transport position if detent lever valve is correctly adjusted. Cam Pivot shaft Fr o nt Detent lever valve 1. Raise planter to field turn around position and check toolbar height is 39"-41". Adjust following procedure for stroke limiter valve adjustment.
Lubrication and Maintenance Model 3700 M0233-01 Row Marker Bearing Lubrication or Replacement Grease seal Outer cup Bearing Flat washer Hub Spindle Slotted hex nut Dust cap Inner cup Marker blade Hub shield Bearing Cotter pin Retainer 1. Remove retainer and marker blade. 2. Remove dust cap from hub. 2. Remove hub shield. Note direction of installation. 3. Remove cotter pin, slotted hex nut, and washer. 4. Slide hub from spindle. 5.
M0233-01 Lubrication and Maintenance Model 3700 Air Clutch Cleaning (Yearly at end of planting season) NOTE: If system is equipped with Pneumatic Down Pressure, air clutches must be removed from planter for cleaning. If system is not equipped with Pneumatic Down Pressure, air clutches can be disassembled and cleaned on planter. At each row unit: 1. Remove meter assembly. 2. Press down collar on air fitting and remove air hose. 3. Loosen tension from chain and remove from air clutch sprocket. 4.
Lubrication and Maintenance Model 3700 M0233-01 WARNING Uncontrolled machine movement can crush or cause loss of control resulting in death, serious injury, or damage to property and equipment. Install all safety lockup devices before working under or transporting this equipment. Lift/Ground Drive Wheel Bearing Repack or Replacement Hub Jam nuts Bearing cup Inner bearing Outer bearing Spindle Bearing cup 1. Raise tire clear of ground and remove wheel. 2.
Lubrication and Maintenance M0233-01 Model 3700 WARNING Uncontrolled machine movement can crush or cause loss of control resulting in death, serious injury, or damage to property and equipment. Install all safety lockup devices before working under or transporting this equipment. Transport Wheel Bearing Replacement Spindle Inner bearing ¾"-16 flange nut Seal Bearing cup Outer bearing Bearing cup Cotter pin Dust cap Hex head cap screw 2" washer Hub 2" slotted nut Seal 1.
Lubrication and Maintenance Model 3700 M0233-01 Fertilizer Check Valve Cleaning and Repair Spring O-ring Valve ball Guide Valve seat Direction of flow 1. Unscrew valve body and separate halves. Note direction and location of parts. 2. Clean and inspect parts. Flush with clean water. Replace damaged parts. 3. Reassemble exactly as shown. O-ring and valve seat must be firmly in place inside each half of valve body.
Lubrication and Maintenance M0233-01 Model 3700 Preparation for Storage Store planter in a dry sheltered area if possible. Remove all trash wrapped on sprockets or shafts and remove dirt that can draw and hold moisture. Clean all drive chains and coat with a rust preventative spray, or remove chains and submerge in oil. Lubricate planter and row units at all lubrication points. Inspect planter for parts that in need of replacement and order during “off” season.
This page intentionally left blank.
M0233-01 Lubrication and Maintenance Model 3700 Electrical Wiring Diagram for Light Package Light packages supplied on Model 3700 Front Folding Planters meet ASABE Standards. Check with tractor manufacturer for correct wiring harness to be wired into lights on your tractor, . *Optional customer-supplied auxiliary lights and wires may be wired into existing plug terminals. 5-39 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Electrical Control Console Schematic NOTICE USE 10 AMP DELAY ACTION ONLY MAIN FUSE 15A Disconnect control console from tractor battery before doing any electrical work or shorting will damage equipment. Keep wiring harnesses away from high temperature areas or sharp edges. DO NOT route wiring harnesses along battery cables. Use cable ties to keep wire harness away from moving parts on tractor and planter.
Lubrication and Maintenance M0233-01 Model 3700 Electrical Wiring Harness Schematic (on tractor) X K L H A C N D O P E Q Wire Color Function Wire Ga. A Orange/Red Tongue Raise 14 B Blue/Red Fold 14 C Black/Red Ground 14 D White Monitor B 12V 14 E Green Monitor B DATA 14 F Yellow/Red Wing Lock 14 G Orange Point Row - Right 12 H Blue Marker - Left 14 J Black Monitor B Ground 14 14 W J B M Pin No.
Lubrication and Maintenance Model 3700 M0233-01 Electrical Wiring Harness Schematic (on planter) W V U H F S J A G T X R E Q K L B M C N D O P Pin No. Wire Color Function Wire Ga. A Orange/Red Tongue Raise 14 B Blue/Red Fold 14 C Black/Red Ground 14 D White Monitor B 12V 14 E Green Monitor B Data 14 F Yellow/Red Not Used 14 G Orange PT.
M0233-01 Lubrication and Maintenance Model 3700 Valve Block - Located on Hitch Terminal Strip 1.ORANGE/RED 2.ORANGE/RED 3. BLACK/RED 3. BLACK/RED V9 V10 To Valve Block On R.H. Wing 1. ORANGE/RED - Pin “A” (Tongue Retract/Extend) - Port V9 2. ORANGE/RED - Pin “A” (Tongue Retract/Extend) - Port V10 3. BLACK/RED - Pin “C” (Ground) 5-43 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Valve Blocks - Located on Tower and R.H. Wing 1.GREEN (“C”) 2.BLACK (“B”) 3.WHITE (“A”) 4.YELLOW/RED VALVE BLOCK Located On Tower D3 D7 RED V14 D5 BLACK (GROUND) Terminal Strip 5.ORANGE/BLK 5.ORANGE/BLK 6.BROWN 7.YELLOW 8.ORANGE 9.RED/BLK 10.BLUE/BLK 11.BLUE 12.BLUE/RED 13.RED VALVE BLOCK Located On R.H. Wing Terminal Strip RED BLUE RED BLUE RED Ground Clamp GROUND GROUND GROUND V4 V3 V1 V2 GROUND GROUND GROUND GROUND 14.BLACK (GROUND) 1. 2.
Lubrication and Maintenance M0233-01 Model 3700 Control Console Schematic (Optional Two-Speed Point Row Clutches) RED L.H. To Brown R.H. To Orange Pin “T” BLACK (Ground) Pin “S” YELLOW (L.H. Two-Speed Clutch) Pin “C” BLACK/RED (Ground) B L A C K VDC) RED (+ 12 VDC) Pin “R” BROWN (L.H. Point Row Clutch) Pin “G” ORANGE (R.H. Point Row Clutch) Pin “W” ORANGE/ BLACK (Auxiliary) ( - 1 2 BLUE L.H. To Yellow R.H. To Red/Black BLACK To Ground Clamp Pin “U” RED/BLACK (R.H.
Model 3700 Lubrication and Maintenance M0233-01 Electrical Wiring Harness Schematic (Vacuum Fan Control) White (Motor Up) Blue (Motor Down) Brown (Motor Up) Green (Motor Down) Yellow (Coil Power) Black (Ground) Black (Ground) Yellow (Coil Power) Red (Power) Black (Ground) Orange (Vacuum Signal) To digital vacuum gauge. Red (Power) Black (Ground) Orange/Black (Vacuum Signal) 5-46 Rev.
Lubrication and Maintenance M0233-01 Model 3700 Hydraulic schematic (ASD System) Case drain (⅜" hose) Pressure (⅝" hose) P1 R1 P2 R2 ASD fan block Return (¾" hose) ASD fan block NOTICE Failure to connect to a return with zero pressure will damage hydraulic motor. Connect hydraulic motor case drain to a case drain return line with zero pressure on tractor. DO NOT connect hydraulic motor case drain to SCV outlet. Contact tractor manufacturer for specific details on “zero pressure return”. 5-47 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Hydraulic Schematic (Vacuum Fan System) 24 Row 30" Vacuum fan valve block Oil cooler Vacuum fan NOTICE Oil reservoir Failure to connect to a return with zero pressure will damage hydraulic motor. Connect hydraulic motor case drain to a case drain return line with zero pressure on tractor. DO NOT connect hydraulic motor case drain to SCV outlet. Contact tractor manufacturer for specific details on “zero pressure return”. PTO pump 5-48 Rev.
Lubrication and Maintenance M0233-01 Model 3700 Vacuum fan valve block Case drain (⅜" hose) Pressure (⅝" hose) Return (¾" hose) Oil Cooler Pressure (⅝" hose) Return (¾" hose) Vacuum fan Case drain (⅜" hose) Oil reservoir Pressure (⅝" hose) Return (1¼" hose) Return (¾" hose) Case drain (⅜" hose) 5-49 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Hydraulic Schematic (Vacuum Fan System) 24 Row 20"/22" Vacuum fan Vacuum fan Oil filter Oil reservoir Oil cooler PTO pump 5-50 Rev.
This page intentionally left blank.
Lubrication and Maintenance Model 3700 M0233-01 Hydraulic System Schematic (24 Row 20"/22"/30") Pilot Operated Check Valve Pressure Relief Valve Row Marker Flow Control Valve Solenoid Valve Holds Load In One Direction Solenoid Valve Holds Load In Both Directions Check Valve Valve block on R.H. wing B1 A1 A8 B8 A9 B9 V5 V6 V4 B7 B6 V3 A6 V1 Marker speed raise B4 A4 V8 A7 V2 B5 V7 A5 Marker speed lower R.H. marker cylinder L.H. marker cylinder 5-52 Rev.
Lubrication and Maintenance M0233-01 Model 3700 Pilot Pressure Booster Valve Block Pilot Operated Check Valve Check Valve VALVE BLOCK ON L.H. WING Check Valve C9 V14 DETENT LEVER VALVE C7 D5 D4 E1 B1 D1 C1 A1 Front B2 D2 C2 A2 Blue BB (Pressure) Red BB (Pressure) Blue AA (Return) Red AA (Return) PARALLEL LINKAGELINKAGE CYLINDER HITCH PARALLEL CYLINDER 5-53 Rev.
Lubrication and Maintenance Model 3700 M0233-01 Hydraulic System Schematic (36 Row 20") Pilot Operated Check Valve ASSIST CYLINDER Pressure Relief Valve Row Marker Flow Control Valve VALVE BLOCK ON R.H. WHEEL MODULE Solenoid Valve Holds Load In One Direction Solenoid Valve Holds Load In Both Directions Check Valve B1 A1 VALVE BLOCK ON R.H. WING A8 B8 B8 A9 B9 V5 V6 V4 B7 B6 V3 A6 Marker Speed Raise B4 A4 V8 V1 A7 V2 B5 V7 A5 R.H. R.H. Marker Speed Lower MARKER CYLINDER 5-54 L.
Lubrication and Maintenance M0233-01 Model 3700 Pilot Pressure Booster Valve Block Pilot Operated Check Valve Check Valve Check Valve C9 VALVE BLOCK ON L.H. WHEEL MODULE V14 ASSIST CYLINDER C7 D5 D4 DETENT LEVER VALVE E1 B1 D1 C1 A1 B2 D2 C2 A2 Direction of Travel Blue BB (Pressure) Red BB (Pressure) Blue AA (Return) Red AA (Return) PARALLEL LINKAGE HITCH PARALLEL CYLINDER CYLINDER LINKAGE 5-55 Rev.
5-56 TM WING WHEEL CYLINDERS Same as 24 row Same as 24 row 36 Row (L.H. mirrors R.H.) A8420 24 Row WING WHEEL CYLINDERS (MASTER) Same as 24 row A6842 A12113 A8420 To D7 (R.H.) or D6 (L.H.
Valve block on L.H. wing Valve block on tower Valve block on front hitch Junction block on hose take-up Detent Lever Valve Valve block on R.H. wing Pilot Operated Check Valve Valve block on L.H. wing Stroke Limiter Valve Valve block on L.H. and R.H. wheel module (36 row 20 only) Pilot Pressure Booster Valve Block A6711 A6712 A6713 A6782 A6842 A8420 A8421 A12105 A12113 A14036 Name A6710 Valve Assembly Function Rev.
Lubrication and Maintenance Model 3700 M0233-01 Air Clutch Airline Schematic A B C C B A P/N: A14846 High Pressure Sensor (0-120 p.s.i.) A B C Clutch valve assembly Clutch valve assembly V1 1 2 V2 3 4 5 6 7 8 V1 V4 V3 9 10 11 12 13 14 15 V2 16 17 V4 V3 18 19 20 21 22 23 24 24 Row 20"/30" A B C C B A P/N: A14846 High Pressure Sensor (0-120 p.s.i.
Lubrication and Maintenance M0233-01 Model 3700 Electric Clutch Schematic Section Adapter Cable Clutch Cable Interplant Cable Connects to interplant electric clutch Adapter Clutch Driver Cable (ISOBUS Only) Electric Clutches ISOBUS Cable Rate Control R1 RC R2 R3 Signal Load Power Load Ground PWM 1 Power PWM 1 Ground PWM 2 Power PWM 2 Ground PWM 3 Power PWM 3 Ground Meter Speed 1 Meter Speed 2 Meter Speed 3 RC 1 2 3 47 52 67 72 87 93 10 11 Wire/Color Red Black Red/Green Black/Green Red/Yellow Blac
Lubrication and Maintenance Model 3700 ISOBUS Implement Cable M0233-01 MUX A PMM MUX B 10A Fuse ISO Signal TBC Power TBC Ground ISO CAN H ISO CAN L ECU Power ECU Ground LOAD Power LOAD Ground MUX A Power MUX A Ground MUX A Signal PROP CAN H PROP CAN L MUX B Power MUX B Ground MUX B Signal ISO 6 7 8 9 4 2 3 1 - CAN 20A Fuse Wire/Color Twisted Quad Red Twisted Quad Black Twisted Quad Yellow Twisted Quad Green Red Black Red Black Jacketed 3-Cond White Jacketed 3-Cond Black Jacketed 3-Cond Green Twis
Lubrication and Maintenance M0233-01 Model 3700 Product Control Module Cable RC CC G IS CAN J1 PCM J2 Signal Load Power Load Power Load Power Load Power Load Ground Load Ground Load Ground Load Ground ECU Power CAN H CAN L Switch In Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Section 9 Section 10 Section 11 Section 12 PWM 1 Power PWM 1 Ground PWM 2 Power PWM 2 Ground PWM 3 Power PWM 3 Ground Meter Speed 1 Meter Speed 2 Meter Speed 3 PCM Wire/Color J1 1 Red 2 2 R
Lubrication and Maintenance Model 3700 M0233-01 Implement Switch Extension Cable Motion Sensor Seed Rate Module Clutch Module Imp. Switch 1 Imp. Switch 2 Ground Splice Signal 12V+ Power Switch Signal Motion Signal Ground 12V+ Power Ground 12V+ Power Imp. Switch 1 WP Tower 1 Imp.
Lubrication and Maintenance M0233-01 Model 3700 Section Adapter Cable - 24 Row AMP 1 AMP 2 Signal High Current Power Ground Row 1, 2 Row 3, 4 Row 5, 6 Row 7, 8 Row 9, 10 Row 11, 12 Row 13, 14 Row 15, 16 Row 17, 18 Row 19, 20 Row 21, 22 Row 23, 24 Color Red Black Black Brown Orange Pink Green Yellow Blue Violet Red Tan Gray White AMP 1 (Left) AMP 2 (Right) Molex 1 (16 Gauge) 1 (16 Gauge) 2, 3 1 4, 5 2 6, 7 3 8, 9 4 10, 11 5 12, 13 6 12, 13 7 10, 11 8 8, 9 9 6, 7 10 4, 5 11 2, 3 12 D1 D2 1 (12 Gauge)
Lubrication and Maintenance Model 3700 M0233-01 Clutch Cable - 24 Row B Row 1/24 A B J04 WP Tower - 2 Socket Row 4/21 B Row 2/23 A Row 3/22 A J05 WP Tower - 2 Socket Row 5/20 B Row 4/21 A J06 WP Tower - 2 Socket Row 6/19 B Row 5/20 A J07 WP Tower - 2 Socket Row 7/18 B Row 6/19 A J08 WP Tower - 2 Socket Row 8/17 B Row 7/18 A J09 WP Tower - 2 Socket Row 9/16 B Row 8/17 A J10 WP Tower - 2 Socket Row 10/15 B Row 9/16 A J11 WP Tower - 2 Socket Row 11/14 B Row 10/15 A J12 WP Tower -
Lubrication and Maintenance M0233-01 Model 3700 J05 WP Tower - 2 Socket Row 5/32 J04 WP Tower - 2 Socket Row 4/33 J03 WP Tower - 2 Socket Row 3/34 J02 WP Tower - 2 Socket Row 2/35 J01 WP Tower - 2 Socket Row 1/36 B B Row 17/20 A B Row 16/21 A B Row 15/22 A B Row 14/23 A B Row 13/24 A B Row 12/25 A B Row 11/26 A B Row 10/27 A B Row 9/28 A B B B B B J06 WP Tower - 2 Socket Row 6/31 B J07 WP Tower - 2 Socket Row 7/30 B J08 WP Tower - 2 Socket Row 8/29 Power Row 1/36 Row 2/35 Row 3/3
This page intentionally left blank.
Troubleshooting M0233-01 Model 3700 Air Clutch PROBLEM POSSIBLE CAUSE SOLUTION Clutches slip (effected row does Plunger in cylinder seized. not plant or skips). Worn Clutch. Dirt/debris buildup inside clutch. Remove air line and lubricated with pneumatic or light duty hydraulic oil. Replace worn items. Disassemble clean as needed. Reassemble. Air Seed Delivery (ASD) PROBLEM Seed does not travel through delivery tubes. Seed stops flowing to row unit during planting.
Model 3700 Troubleshooting M0233-01 KPM III Electronic Seed Monitor PROBLEM POSSIBLE CAUSE Single sensor communication alarm comes on. Faulty seed tube sensor. Break in the harness just before the seed tube sensor. Sensor communication alarms come on for all sensors. Dirty or corroded connector. Faulty monitor. Break in the harness just after the monitor. Sensor communication alarms come on for some sensors. Faulty monitor values (such as speed, area, etc.) being displayed.
M0233-01 Troubleshooting Model 3700 Piston Pump PROBLEM Pump hard or impossible to prime. Low metering. Over meters. Leaks through when stopped. Fertilizer solution leaking under stuffing box. Pump using excessive oil. Pump operates noisily. POSSIBLE CAUSE SOLUTION Valves fouled or in wrong place. Air leak in suction line. Pump set too low. Packing washers worn out. Valves fouled or in wrong place. Air leak in suction line. Pump set too low. Broken valve spring. Broken discharge valve spring.
Model 3700 Troubleshooting M0233-01 Point Row Clutch PROBLEM No clutches disengage. One section of planter will not re-engage. One clutch will not engage. Clutch slipping. Planter section does not reengage while planter is moving forward. Frequent solenoid burnout. Frequent fuse burnout. Clutch or clutches will not disengage. POSSIBLE CAUSE SOLUTION Main fuse blown in control console. Replace defective fuse. Poor terminal connection in wiring harness. Repair or replace.
Troubleshooting M0233-01 Model 3700 PTO Pump Drive and Oil Cooler Option PROBLEM POSSIBLE CAUSE SOLUTION Pump is squealing. Lack of oil to pump. Check for plugged suction strainer. Check oil level. Oil temperature high. Low oil level. Check oil level and add as required. Desired fan speed cannot be achieved. Low oil level. Check oil level and add as required. Plugged filter. Check and change as required. Vacuum level not displayed. Digital vacuum gauge console power OFF. Turn ON.
Model 3700 Troubleshooting M0233-01 Seed Meter (Brush-Type) PROBLEM Low count. POSSIBLE CAUSE SOLUTION Meter RPM too high. Seed sensor not picking up all seeds dropped. Lack of lubrication causing seeds not to release from disc properly. Seed size too large for seed disc being used. Seed treatment buildup in meter. Low count at low RPM and higher count at higher RPM. Foreign material lodged in upper brush. Worn upper brush. Reduce planting speed. Clean seed tube. Switch meter to different row.
M0233-01 Troubleshooting Model 3700 Seed Meter (EdgeVac) PROBLEM Low seed count. POSSIBLE CAUSE Meter RPM too high. Singulator brush setting too aggressive. Vacuum level too low. Seed sensor not picking up all seeds dropped. Seeds sticking to seed disc. Seed treatment buildup in seed disc recesses. Seed size too large for disc used. Wrong transmission setting. Wrong seed disc. Drive wheel slipage. Low tire pressure. Failed/worn drive components. Plugged orifices in seed disc. Loss of vacuum at meter.
Troubleshooting Model 3700 M0233-01 Seed Meter (EdgeVac) - Continued PROBLEM Not planting seed. (Continued) High seed count. POSSIBLE CAUSE SOLUTION Seed baffle (If Applicable) not allowing seed flow due to bridging of seed. 60 cell soybean disc not filling properly due to excessive RPM. Wrong transmission setting. High vacuum. Wrong seed disc. Singulator brush setting not aggressive enough. Worn singulator brush. Seed leaking past wall brush. Faulty vacuum gauge. Poor seed spacing.
Troubleshooting M0233-01 Model 3700 Seed Meter (Finger Pickup) PROBLEM One row not planting seed. Unit is skipping. Planting too many doubles. Overplanting. Underplanting. Irregular or incorrect seed spacing. Seed spacing not as indicated in charts. Scattering of seeds. Seed tubes and/or openers plugging. Inconsistent seed depth. POSSIBLE CAUSE Drive release not engaged. Foreign material in hopper. SOLUTION Engage drive release mechanism. Clean hopper and finger carrier mechanism.
Troubleshooting Model 3700 M0233-01 Solenoid Valve PROBLEM No solenoids operate. One solenoid valve will not operate. Valve operating when not energized. POSSIBLE CAUSE SOLUTION Low voltage. Blown fuse. Battery connection. Wiring harness damaged. Bad switch. Cut wire in harness. Bad coil. Poor connection at coil. Valve stem stuck open. O-ring leaking. Must be connected to 12 volt DC only. Negative ground. Replace control console fuse with AGC-15 amp. Clean and tighten. Repair or replace.
