Product Info
I. Take reader out of the packaging.
II. Connect the reader to a power source using the USB cable to activate it. A light will flash
green on the device.
III. Fully charge reader until the light turns from flashing green to solid green.
IV. Disconnect from power source.
4. Placing the reader inside your bag
I. Place reader inside bag. Velcro strips must face the sides of the bag.
II. Peel cover off Velcro strips.
III. Adjust the reader so it covers the bottom and sides of the bag.
IV. Press firmly the Velcro strips to secure the reader in place.
V. Download the Kipit app and follow instructions to connect to device and use.
B. SAFETY
This Kipit device contains a rechargeable battery cell. Please review and adhere to the following
safety instructions:
DO NOT INCINERATE, DISASSEMBLE, EXPOSE THE DEVICE TO HIGH
TEMPERATURE 212F (100C) DUE TO RISK OF FIRE OR EXPLOSION. IF BATTERY
CELL BECOMES SEPARATED FROM DEVICE, DO NOT INCINERATE, DISASSEMBLE,
EXPOSE TO HIGH TEMPERATURE 212F (100C) OR SHORT THE BATTERY
TERMINALS DUE TO RISK OF FIRE OR EXPLOSION. DO NOT OVERHEAT THE DEVICE
BY EXPOSING IT TO DIRECT SUNLIGHT.
DO NOT OVERCHARGE THE DEVICE. DO NOT FORCE DISCHARGE THE BATTERY OF
THE DEVICE.
DO NOT OPEN OR DISASSEMBLE ANY PARTS OF THE DEVICE. DO NOT DISMANTLE,
DEFORM OR MODIFY THE BATTERY CELL OF THE DEVICE. IN CASE OF INGESTION
OF THE BATTERY CELL, THE PERSON INVOLVED SHOULD SEEK MEDICAL
ASSISTANCE PROMPTLY.
IF DEVICE OVERHEATS, DISCONNECT CHARGER, IF CONNECTED, AND PLACE
AWAY FROM FLAMMABLE MATERIALS.
IF ANY VISIBLE SWELLING, SMELL OR LEAKS FROM THE BATTERY CELL OCCUR,
DISCONTINUE USE OF DEVICE. IF BATTERY CELL BECOMES SEPARATED FROM
DEVICE, INSULATE THE SOLDER TAGS BY WRAPPING THEM WITH TAPE OR FOIL.
A BATTERY WITH A DAMAGED POUCH SHOULD NOT BE EXPOSED TO WATER.
Follow local, state and federal regulations on proper disposal. Contact a local battery recycling
center for disposal instructions.