Instructions / Assembly
ITEM #: RV-W2537-1
IMPORTANT SAFETY INSTRUCTIONS
• To avoid injury or damage, mount only on a surface that is sturdy.
• To avoid electric shock, make sure the electricity is turned off at the main
circuit breaker panel. If you are replacing an existing fixture, turn off the
following in order: fixture, wall switch, and main fuse or breaker box.
Note: Some types of fuses must be unscrewed to shut the power off.
• If you are unclear as to how to proceed, please consult a licensed
electrician.
UNPACK THE FIXTURE: Check the contents of the box. Box should contain all items on the parts diagram.
For any replacement parts or installation issues, please Contact Us!
Email: help@kira-home.com
Facebook/Instagram: @KiraHomeDecor
Phone: 888.208.2085
INSTALLATION INSTRUCTIONS
1. Measure Backplate (E) height on the fixture body with measuring tape. Adjust Backplate Screws (D) on
Mounting Plate (A) to the height of measured backplate plus 1/4" to allow them to protrude through the
backplate during installation. Lock Backplate Screws (D) in place with the hex nuts.
2. Secure Mounting Plate (A) to the junction box (not included) using Mounting Screws (B) provided. Ensure
Mounting Plate (A) is positioned with Backplate Screws (D) pointing away from the junction box.
3. Place Backplate (E) against the wall by inserting Backplate Screws (D) through the appropriate holes
located on Backplate (E). Adjust Backplate Screws (D) and hex nuts until 1/4' of the threaded portion is
visible. Remove the fixture from the wall and set it aside.
Note: If 1/4" of Backplate Screws (D) are not visible, remove Backplate (E) and re-adjust Backplate
Screws (D) to proper length and lock them in place with the hex nuts.
4. Using the wire graph below, connect the appropriate wires from the fixture to the corresponding wires in
the electrical junction box (not included) and secure Wire Connectors (C).