DP580 Digital Two-way Radio 2
T60 Portable PoC Two-way Radio T60 Portable PoC Two-Way Radio User Manual Thank you for choosing Kirisun portable PoC two-way radio. We believe that the product will bring much convenience to your work and life. Kirisun portable PoC two-way radio adopts advanced technology and fine technique. We hope that you will be satisfied with the .quality and functions of the product.
User Manual Notice ◆ Please read the manual carefully before using the product. We consider that you have acquainted with the manual when you start to use the product. ◆ Please keep the manual well for further reference. ◆ The intellectual property of all parts of the product, including accessories, is owned by Kirisun and its authorized subjects. Without permission of Kirisun and such subjects, no copy, extraction or translation of such parts is allowed.
T60 Portable PoC Two-way Radio Safety Precaution ◆ The two-way radio can be repaired only by professional technicians. Users should not disassemble it by themselves. ◆ To avoid problems caused by electromagnetic interference or electromagnetic incompatibility, please turn off the radio in a place where you are instructed to do so, for example, a hospital, a health care center and an aircraft. ◆ In a vehicle with an air bag, please keep the radio out of the expansion area of the air bag.
User Manual Battery ◆ Contact of conductive substance on human body, for example, jewelry, a key and a bead necklace, with an exposed battery terminal may result in damage to personal belongings and injury like burn caused by a high temperature after the battery is short circuited with such substance. Please handle a charged battery carefully, especially when you put it in a pocket, wallet or metallic container. To reduce risk of injury, avoid exposure to fire, disassembly or pressing.
T60 Portable PoC Two-way Radio Contents 1. Using the Battery ............................................................................................. 2 2. Using the Accessories ..................................................................................... 4 3. Appearance ..................................................................................................... 8 4. Programming Keys .......................................................................................... 9 5.
保修卡 1. Using the Battery 1.1 Notice for Charging The radio is delivered uncharged. Before using the radio for the first time, please charge the battery. If the battery is not used for a long time or run out, please charge it before using it again. It is necessary to charge and discharge the battery for two or three times to attain the best performance of it. When you see a warning of low voltage on the radio, please charge or replace the battery.
1.2 Charging You can charge the battery using one of the following methods. (1) Charging via Micro USB Port on Right Side a. Open the cover of external interfaces on the right side of the radio to find the Micro USB port. b. Connect the port using the programming/charging cable to charge the radio. (2) Charging via Micro USB port on Bottom Side a. Uninstall the battery. b. Connect the radio to the Micro USB port at the bottom of the radio using the data/charging cable to charge the radio.
保修卡 c. Put the radio (with the battery installed) into the charger to start charging. Red LED indicator light will be on. Ensure good contact between the battery and the charging terminals. d. After charging for about 6 hours, red light will be off and green light on. Now the battery is fully charged. For optimized battery performance, continue charging for 1 to 2 hours, and then take out the radio. e. Unplug the power adapter. Note: The radio is delivered uncharged.
2. Using the Accessories 2.1 Installing/Uninstalling the Battery ◆Installing the Battery (1) Press the upper part of the belt clip gently so that it goes up. (Figure ①) (2) Align the battery with the battery holder at the back of the radio, and then insert the battery. (Figure ②) (3) Push the battery in the direction indicated until the latch is in position. (Figure ③) (4) Press the upper part of the battery until it is latched. (Figure ④) ◆Uninstalling the Battery (1) Power off the radio.
保修卡 Note: Do not short out battery terminals or discard the battery in fire. Do not disassemble the battery casing. 2.2 Installing/Uninstalling the Antenna To install the antenna, plug the threaded end into the antenna interface, and rotate the antenna clockwise until it is tight. To uninstall the antenna, rotate it counterclockwise. 2.
2.4 Connecting Programming/Charging Cable Open the cover of external interfaces on the right side of the radio, find the Micro USB port, connect the port to a PC using the programming/charging cable, and write/read parameters using the attached programming software. 2.5 Connecting an Earphone (Optional) To use an earphone, open the earphone cover at the upper part of the right side of the radio, and then plug the earphone connector into the jack.
保修卡 3.
SN 1 2 3 4 5 6 Item Side Key 1 PTT Key Side Key 2 Antenna Left Menu Key Left Navigation Key SN 11 12 13 14 15 16 7 Speaker 17 8 9 Emergency Alarm Key Channel Knob Power/Volume Knob When the radio is off, rotate it clockwise to power on the radio; when the radio is on, rotate it to adjust the volume, or rotate it counterclockwise until a “Ka da” sound is heard to power off.
保修卡 To cater to users’ habits, programmable keys (i.e. two side keys and one top key) are provided, which can be set as shortcut keys through programming by your dealer. To program a key, connect the programming/charging cable to the Micro USB port of the radio, and then program using the attached programming software. The following functions can be achieved through programming keys.
5. LED Indicator The states of the LED indicator are described in the following table. LED Indicator State Device State Red light on - No SIM card is installed, or it is installed improperly (with voice prompt “No SIM card is installed”). - Fail to unlock the PIN code of the SIM card. Green light on - During a call (i.e. individual/group/all call). Yellow light on - The device is in individual-call standby state. - The device is not configured on the server (with voice prompt “Not configured”).
保修卡 LED Indicator State No indication Device State - The device is powered off. 6. Icons The following screen icons are used to indicate the state of the radio.
Icon Description Bluetooth enabled, searching for Bluetooth device Connected to Bluetooth device Remaining battery capacity Unread short message 7. Basic Operation 7.1 Powering On/Off When the radio is off, rotate the Power/Volume knob clockwise until a click is heard to power on the radio. When the radio is on, rotate the Power/Volume knob counterclockwise until a click is heard to turn off the radio. 7.
保修卡 7.3 Adjusting the Volume When the radio is on, rotate the Power/Volume knob clockwise to increase the volume or counterclockwise to decrease it. 7.4 Selecting a Group You can select a group using one of the following methods. Method 1: After the radio registers successfully and enters standby state, rotate the Group knob to select a group.
group member initiates a call, the radio will have green LED indicator light on, and receive traffic from the group. 7.7 Delayed Callback Admission Use this function to delay admitting the radio to a group call for a period of time. 7.8 Priority Call You may set different priorities for different radios, so that a radio with a higher priority can initiate a call before a radio with a lower priority does and interrupt an ongoing call. 7.
保修卡 Note: You may select a callee radio from the Contact List. 3) Initiating an Individual Call Make sure the radio is normal state (i.e. green light flashes slow). Press the PTT key. After the call is set up successfully, yellow light will be on, and the callee’s name and call type will be displayed on the LCD screen. When the callee receives the call, yellow light will be on, and the caller’s name will be displayed on the LCD screen.
The default call duration for all types of calls is 60 seconds, which can be modified through the network management platform. If call duration exceeds this value, the call will end automatically. 7.11 Downloading and Playing Back Video Records Downloading and Playing Back Video Records You can download and play back the latest 5 voice records.
保修卡 When remaining battery capacity is below 10%, there is voice prompt “Low battery, please charge”. When remaining battery capacity is below 5%, there will be voice prompt “Low battery, please charge” at an interval. Please replace the battery, or power off the radio and charge the battery. 7.
There are two alarm modes as below, which can be set by going to “Menu” “Settings” “Alarm Modes”. a. Silent Alarm: Under this mode, the radio sends an emergency alarm silently, and receive an alarm with voice prompt “SOS alarm from ***”. b. Alarm and call: If silent alarm is disabled, the radio sends an emergency alarm and rings a siren, and receive an alarm and rings a siren with voice prompt “SOS alarm from ***”. To view sent alarms and received alarms, go to “Menu” “Message Records” “SOS Messages”.
保修卡 8. Technical Specifications General Communication System & Frequency Bands GSM/GPRS: 850 WCDMA/HSPA: B5 FDD-LTE: B4/5/7/17 Storage Temperature -40℃ ~ + 80℃ Operating Temperature -20℃ ~ + 40℃ Water and Dust Resistance IP 54 Dimension (H*W*D) 115mm*54mm*30mm (battery included, antenna excluded) Weight 330g (battery and antenna included) Screen 160*128 pixels, monochrome screen Keypad Qwerty Battery 3600mAh Li-ion Operating Voltage 3.
4G: 13 hrs (GPS on), 15 hrs (GPS off) Transmitter Transmitting Power 2G: 33dBm±2dB 3G: 24dBm+1/-3dB 4G: 23dBm+1/-3dB Audio Distortion 5% (typical) Receiver 2G:BER < 0.001 when Îor = -106.7 (-108) dBm Receiving Sensitivity 3G: BER < 0.001 when Îor = -106.7 (-108) dBm 4G:BER < 0.
保修卡 FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
保修卡 IC Statement IC STATEMENT This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
25
