Installation Guide

KISAE DC DC Charger Remote Panel DMTRM1201
Installation and Operation Guide
A qualified technician is required to install the DMTRM1201 Remote Panel to the DC to
DC Charger. Take caution when working with battery. Always disconnect all the three
channels connected to the DMT1230 or DMT1250 before making any installation.
Caution: This Remote Panel can only be used with KISAE DMT1230 and DMT1250 DC to DC
Charger Series.
Mounting the Remote Panel:
Choose an appropriate mounting location.
Use the wall cutout template and the Remote Panel mounting template to mark the positions
of the mounting holes.
Install the RJ45 Cable in your desired location.
Connect one end of the RJ45 cable to COM_1’ Port of Remote Panel. Please note the
polarity.
Secure the Remote Panel.
Connect the other end of RJ45 cable to the Remote port of the charger. Please note the
polarity.
The Remote Panel is now ready to use.
Understanding the Remote Panel function:
The DMTRM1201 Remote share the same controls and displays functions as the display on
the DMT1230 and DMT1250 charger.
Please read Understanding the Display & Function Keys during normal operation for details.

Summary of content (2 pages)