Manual

Page - 6
CURRENT SENSOR
The Current Sensor is an
Integrated Copper Shunt,
which mounts on the
NEGATIVE (Ground) battery
post.
 Shunt is rated for 100
Amps MAX current
 The power wire attached
to the shunt must be
connected to the positive
battery post or a 12v source.
INSTALLING CURRENT SENSOR:
X Remove ALL cables from
the NEGATIVE (Ground) post
of the battery.
Y Attach ALL ground cables
to the shunt as shown here,
with the nut & bolt supplied.
Z Now you can re-attach the
other eyelet of the shunt on
the Ground post of the battery,
using the original bolt.
Note! The orientation of the Left/Right eyelets is important to keep
correct Input/Output of the current flow.