User's Manual
11
Note, however, that if the AGC activates and reduces the amplication
level of the Cellular Signal Booster ampliers, the Cellular Signal Booster
system will not perform at its peak because the output signals emitted by
the antennas will be weaker reducing the signal levels received by both
your handset and the Carrier Base Station.
It is possible to control the level of AGC deployed by making sure the
Patch and Service Antennas are installed at a sufcient distance apart.
Using patent pending Fastall
TM
circuitry, the ClearCell + Plus Cellular
Signal Booster’s RANGE and SIGNAL LCD indicators (Fig. 7) will aid you
in the placement of the antennas and ensure the product’s best possible
performance.
Figure 7
ClearCell Plus Cellular Signal Booster
Amplier Indicators
The SIGNAL meter on the right helps you locate and tune the Patch
Antenna that links to your carrier’s base station. The RANGE meter on the
left helps you optimize the location and orientation of the Service Antenna
attached to the side of the Base Amplier.