User's Manual
13
3. Clean the inside of the window at the location you will be mounting
the Patch Antenna, preferably about 12 inches from the top. Use a
cleaning liquid that does not leave residue, such as rubbing alcohol.
4. With the locking latch in the open position (Fig. 9) press the clear
suction cup against the clean glass and lock the latch into place as
shown (Fig. 11.) The Patch Antenna will be loose on the bracket, but
it will be tightened in a later step.
Figure 11
Latch
Closed
5. With the Base Amplier near the Patch Antenna, connect the Patch
Antenna’s cable to the Base Amplier at the right side top threaded
connector (Fig. 12.) DO NOT CONNECT the Service Antenna to the
unit at this stage.
AC
Adapter
Cable
Patch
Antenna
Coax
Figure 12
6. Connect the AC Adapter to the Base Amplier and plug it into an AC
outlet near the Patch Antenna (Fig. 12.)