User's Manual

7. The unit will initialize itself in approximately 5 seconds. The blinking

CHECKING indicator will disappear when it is okay to proceed.

8. Once the initialization process is completed, adjust the Patch Antenna

direction such that it yields the maximum number of bars on the

SIGNAL meter shown in the circle below (Fig. 13.) Then tighten the

Adjustment Nut to lock the antenna in that position. This process

tunes the antenna for the best possible link with your carrier’s base

station.

9. Disconnect the AC Adapter from the AC outlet and move the Base

Amplier to a location centralized in the area you would like to improve

coverage. In most cases, this location should be at least 25 feet from

the Patch Antenna you just installed and near an AC outlet.

Figure 13

Adapter

Cable

Patch

Antenna

Coax