User's Manual
16
12. Connect the AC Adapter to the Base Amplier and plug it into an AC
outlet in the location where you plan to install the Base Amplier.
13. Once the unit has initialized itself (as in Step 8) adjust the position of
the Base Amplier to achieve the highest number of concentric bars
in the RANGE indicator, circled below (Fig. 17.) The RANGE indicator
shows the size of the area the Cellular Signal Booster will cover in
your home. The more bars showing, the better the coverage and
performance.
NOTE: If at any time the red ALARM light, circled above (Fig. 17), comes
on, and the display ashes, you are too close to the window-
mounted Patch Antenna and will need to move the Base Amplier
farther away from that window. Once you have done this, unplug
the AC Adapter from the Base Amplier for 5 seconds to reset the
unit, move Base Amplier to a new location, and then plug it back
in. Repeat step 14.
14. Once optimized, place the Base Amplier on a table or use steps
16 and 17 to mount the unit on a wall with the included mounting
bracket.
Figure 17
RED
ALARM
Light
RANGE
Indicator