User's Manual
17
15. Periodically monitor the LCD indicators to ensure the installation
remains stable. If any of the indicators experiences a drastic reduction
in bars, inspect the complete installation and correct any problems.
Note: Over time your Cellular Carrier may have system outages, will add,
or modify a Base Stations in your area. This may cause a change
in the performance of your Cellular Signal Booster System. If you
notice drastic changes in signal readings or your performance of
your handset has changed, please contact your Carrier to nd out if
there were changes. If the problem is a System Outage simple wait
for the problem to be corrected. If the carrier has made changes
to base station in your area, repeat the Site Evaluation to see
if the window with the strongest signal has changed. You may
need to reinstall the system again to compensate for these Carrier
changes.
Wall Mount Option
16. To mount the Base Amplier on a wall, secure the wall mount bracket
(Fig. 18) in your desired location using the provided plastic anchors
and screws. Since the Base Amplier is lightweight, only 2 screws are
needed. The top 2 holes are recommended for the screws.
Figure 18
Screw Holes
for mounting
to wall
Wall Mount
Bracket