User's Manual
8
To install the Cellular Signal Booster System properly, the Patch Antenna
should be mounted on the window in your home closest to your cellular
carrier’s system base station. Since windows have little to no signal
degradation, the Patch Antenna can receive cellular signals and route
them into your home through a Radio Frequency Coaxial Cable that leads
to the Base Amplier. The Amplier then augments incoming signals to
improve their quality, and, nally, emits them through its attached Service
Antenna to your handset. Install the Base Amplier in the place in your
home where cellular reception is the weakest. A basic topographical view
of this conguration is shown in Fig. 4.
Carrier
Base
Station
Home
Base Amplier
Patch
Antenna
Figure 4
Topographical View of Cellular Signal
Booster Installation
Service
Antenna