User's Manual

15 / 30
Kisan Telecom Confidential Proprietary
9
[TX HPA for MIMO0]
16Watt(42dBm) High power amplifier built-in
linearizer amplifies the TX0 signal to high power
level and sends to RU ANT through the MIMO0
FE-Duplexer.
10
[TX HPA for MIMO1]
16Watt(42dBm) High power amplifier built-in
linearizer amplifies the TX1 signal to high power
level and sends to RU ANT through the MIMO1
FE-Duplexer.
11
[FE-Duplexer for MIMO0]
Front end duplexer that passes through TX0 and
RX0 frequency bands.
12
[FE-Duplexer for MIMO1]
Front end duplexer that passes through TX1 and
RX1 frequency bands.
13
[PSU]
Converts AC 110V to DC 29V/9V/6.5V/5.5V, and
distributes the necessary power to each modules.
14
[NMS Controller]
Monitors the status of modules in RU and
controls the configurable parameters of the RU
modules.
15
[Interface BD]
Provides operating voltage and monitors/controls
signal to modules connected to interface B’D.
Also provides a connection port to communicate
with NMS B’D.