User's Manual

24 / 30
Kisan Telecom Confidential Proprietary
Group Description
 Version: Firmware Versoin
 Type: Repeater unit type
 Name: ID of MHU for the communication
 Gain Setting
 TX: sets ATT to have 35dBm of output at the
RU ANT Port
 RX: sets ATT to have 40dB gain of Rx path
 Tx/Rx Gain setting function carries out Tx/Rx
gain setting including automatic optical loss
compensation.
 User Connect: Connection status of COM port of
repeater
 PSU: Status of PSU
 TMPCUR: Current temperature of the equipment
 TMPUPR: set the upper threshold value of
temperature (button) and alarm status (LED)
 Install: This sets up the RU to communicate with
MHU. Even when an RU is connected to MHU
physically by optic cable, the RU cannot
communicate with MHU if RU is not installed
logically by GUI.
 LD Power: Transmitted optical power level to RU
 LD Lower: Lower limit level of the LD power
 PD Power: Received optical power level from RU
 PD Lower: Lower limit level of the PD power
 TX Input: Tx level input from BTS
 TX Upper: Upper limit of Tx input level
 TX Lower: Lower limit of Tx input level
 RX output: Rx level output to BTS
 RX Upper: Upper limit of Rx output level
 RX output: Rx level output to BTS
 RX Upper: Upper limit of Rx output level
 RX AGC ATT: RX path ATT for optic AGC
 RU install: display the RU installation status
6.8.4. LMR250R01 RU Status Retrieval and Control