User guide

Chapter 3. LD3xi/LD3xiC Mounting
3-9
CAUTION: Only use
Sikaflex™ 1A polyure-
thane sealant or Dow
Corning™ RTV 739 or
RTV 738. Other
sealants may contain
acetic acid, which is
harmful to sensors and
electronics.
6. Route the cable from the last junction box through
conduit to the signal processor. Refer to the signal
processor manual for wiring the junction box to the signal
processor. One vessel takes up one channel in the signal
processor — the channel shows the average value from
all the load discs under the vessel.
Figure 3-8: Wiring Stainless Steel Junction Boxes Together and to Signal Processor