Technical Specs

LED Locked
Indicator
Enabled by default.
To disable, you will require the Remote Card Authorisation or the
optional Codelocks Keypad Accessory Unit are required:
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch Master User Card to lock
3. On the keypad, enter:
1. Press # • 08 • 01 •• to disable (default)
2. Press # • 08 • 02 •• to enable
Enable
Public
Pairing
Public pairing is enabled by default and cannot be disabled
Factory reset
TO DO To be confirmed by Kingtronics
Setting up
time-based
functions
Note: The Codelocks Keypad Accessory Unit is required for this function
The lock has the following time-based functions:
• Open after x hours
• Open at xx:yy time *
* Requires date/time to be set
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch the Master User Card to the lock
3. Enter the current date/time in the format:
o Press # • 12 • yyMMddhhmm • <1-7> ••
o E.g: For Friday 28th September 2018, 12:15, enter: # •
12 • 1808281215 • 5 ••
o The <1-7> will correspond with the day of the week start
with Monday as 1, Tuesday as 2 etc.
Open after x
hours
Note: The Codelocks Keypad Accessory Unit is required for this function
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch the Master User Card to the lock
3. On the keypad, enter:
1. Press # • 10 • <Hours to remain locked> ••