Technical Specs

Create lock
group
Create Lock Group Initialisation card via Portal & desktop software. This
card will enable RCA on the respective locks.
1. Sign into Portal - navigate to Remote Card Authorisation >
Create Lock Group
2. Select lock model (KL1100)
3. Enter a name and location for your Lock Group
4. Select the timezone for the Lock Group
5. Enter the starting Lock ID - this must be an integer value. The
first lock to be initialised will be assigned this ID. After the first
lock to be initialised, the next lock will be initialised with an
incremented ID and so on.
6. Enter the number of locks that you will initialise
1. Note: This value must be accurate otherwise you will
may not be able to correctly add locks to cards
7. Click Save & Commit
8. Open your Codelocks Card Manager Client software (on your
PC), place a MIFARE card on the USB card reader
9. From the list of available actions, select the "Lock Group
Initialisation" action
10. In the CCMC software, click "Apply" - once the information has
been written to the card, a confirmation message will be
displayed and you will be able to use the card to enable RCA on
the respective locks.
1. Note: This Initialisation Card must be kept secure and/or
destroyed after use. This card is NOT the same as a
Master Card.
TO INITIALISE THE LOCKS, REFER TO
Lock Initialisation
.