Installation Instructions
Table Of Contents
- Sécurité de la cuisinière
- Exigences d’installation
- Instructions d’installation
- Déballage de la cuisinière
- Retirer la porte
- Installation de la bride antibasculement
- Raccordement au gaz
- Vérification de l’emplacement de la bride antibasculement
- Installer le plateau d’égouttement
- Système d’allumage électronique
- Ajustement de l’aplomb de la cuisinière
- Installer la plinthe
- TERMINER L’INSTALLATION
- Conversions pour changement de gaz
20
Complete Installation
1. Refer to the “Make Gas Connection” section for properly connecting the range to the gas supply.
2. Refer to the “Electronic Ignition System” section for proper burner ignition, operation, and burner ame adjustments.
IMPORTANT: You may have to adjust the “LO” setting for each range burner.
Checking for proper range burner ame is very important. The small inner cone should have a very distinct blue ame 1/4" (6.4
mm) to 1/2" (1.3 cm) long. The outer cone is not as distinct as the inner cone. Propane gas ames have a slightly yellow tip.
3. Refer to “Complete Installation” in the “Installation Instructions” section of this manual to complete this procedure.