Operation Manual

CMD + SHIFT CLICK TO CHANGE COPY CMD + SHIFT CLICK TO CHANGE COPY
14
OPERATING THE COFFEE BREWER
3
After pressing SET to choose AM or PM
for your Delay start brew time, 2 beeps
will sound and you will be returned to
the programming menu. The Delay start
program is ready to use.
You can use the same Delay start brew time
again by pressing the MENU button twice,
then pressing SET three times before brewing.
To cancel the Delay start feature at any time,
press the BREW button two times.
NOTE: You must complete step 4 each time you wish to enable the Delay start feature.
Setting up the Delay start feature
2
Use the “+” or “-” toggle bar to choose
the hour you want the Coffee Brewer to
begin brewing, then press SET. Then, do
the same to set the minutes and AM/PM.
1
To set up the Delay start feature, press
the MENU button twice, until the Auto
indicator is flashing on the display.
OPERATING THE COFFEE BREWER
W10675728B_01_EN_v02.indd 14 11/13/14 10:37 AM