Model 5KFP0925 W10529658A_01_EN.
Food Processor Instructions English Table of Contents FOOD PROCESSOR SAFETY Important Safeguards.................................................................................................6 Electrical Requirements..............................................................................................7 Electrical Equipment Waste Disposal.........................................................................7 PARTS AND FEATURES Food Processor Parts...............................................
Food Processor Safety IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3.
Food Processor Safety IMPORTANT SAFEGUARDS English 15. Never feed food by hand. Always use the food pusher. 16. Do not attempt to defeat the cover interlock mechanism. 17. This product is designed for household use only. SAVE THESE INSTRUCTIONS Electrical Requirements Voltage: 220-240 Volts Frequency: 50/60 Hertz Wattage: 240 Watts NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way.
Parts and Features Food Processor Parts Adjustable Slicing Disc (Thin to Thick) Reversible (2 mm and 4 mm) Shredding Disc Shredding Adapter Work Bowl Cover with 3-in-1 Feed Tube 710 ml Mini-Bowl and Mini-Blade 3-Piece Food Pusher Stainless Steel Multipurpose Blade 2.1 L Work Bowl Plastic Dough Blade Base 8 W10529658A_01_EN.
Parts and Features Adjustable Slicing Control KitchenAid’s adjustable slicing disc allows you to manually adjust slicing thickness from thin to thick. Speed 1/Speed 2/Pulse Control Two speeds and Pulse provide precise control to give great results with almost any food. Work Bowl Cover with 3-in-1 Feed Tube The 3-in-1 feed tube accommodates large items – like tomatoes, cucumbers, and potatoes – with a minimum of sectioning or slicing. 3-Piece Food Pusher Three pushers are nested inside of each other.
Accessories Accessories Selection Guide Action Mince Chop Puree Setting Food Cheese Chocolate Fruit Fresh Herbs Nuts Tofu Vegetables Meat Pasta Sauce Pesto Salsa Sauces Cake Batter Pie Dough Mix Fruit (soft) Potatoes Tomatoes Vegetables (soft) Slice Thin Slice Thick Shred Fine OR Mini-bowl and Mini Multipurpose Stainless Steel Blade + Adjustable Slicing Disc Cheese Chocolate Fruit (hard) Vegetables (hard) Potatoes Vegetables (soft) Shred Medium Accessory Multipurpose Stainless Steel Blade
Preparing Food Processor for First Use English 2. Lift out the mini-bowl. Before First Use Before using your Food Processor for the first time, wash all parts and accessories either by hand or in the dishwasher (see “Care and Cleaning”). Removing the Work Bowl Cover from the Work Bowl Your Food Processor is shipped with the work bowl cover installed on the work bowl, with the mini-bowl inside the work bowl. To remove the work bowl cover from the work bowl for initial cleaning: 1.
Setting Up Your Food Processor Attaching the Work Bowl 1. Place the Food Processor on a dry, level countertop with the controls facing forward. Do not plug in the Food Processor until it is completely assembled. 2. Place the work bowl on the base, aligning the raised portion with the indentation on the base. The center hole should fit over the power shaft. Attaching the Work Bowl Cover 1. Place the work bowl cover on the work bowl with the feed tube just to the left of the work bowl handle.
Installing the Adjustable Slicing Disc Installing the Reversible Shredding Disc The Adjustable Slicing Disc is easily adjusted and makes slicing tasks simple. Follow these steps for adjusting and installing the Adjustable Slicing Disc. 1. Holding the reversible shredding disc by the 2 finger grips, insert the shredding adapter into the hole in the bottom of the disc. 1. Holding the slicing disc, twist the ridged portion of the shaft clockwise for thinner slices, or counterclockwise for thicker slices.
Setting Up Your Food Processor Installing the Multipurpose Blade or Dough Blade IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl. 1. Place the blade on the power shaft. 2. Rotate the blade so it falls into place on the power shaft. Installing the Mini-Bowl and Mini-Blade 1. Place the mini-bowl inside the work bowl over the power shaft. Rotate the mini-bowl until the tabs on the top edge of the bowl drop into the indents on the top of the work bowl. 2.
Setting Up Your Food Processor Using the 3-in-1 Feed Tube 3-Piece Food Pusher English The 3-in-1 feed tube features a 3-piece food pusher. Use the entire food pusher to process large items, or use the inner portions to create mediumsized or small feed tubes to process smaller items. To slice or shred small items, insert the 3-piece food pusher into the feed tube, then lift out the small pusher to remove.
Using Your Food Processor Using the Speed1/Speed 2 Control 1. To turn on the Food Processor, press the Speed 1 button (low speed, for soft food) or the Speed 2 button (high speed, for hard food). The Food Processor will run continuously and the indicator light will glow. 2. To stop the Food Processor, press the O (OFF) button. The indicator light will go out and the blade or disc will stop within a few seconds. 3. Wait until the blade or disc comes to a complete stop before removing the work bowl cover.
Using Your Food Processor English 5. If using the mini-bowl, grasp and remove the bowl using the finger grips located along the top edge of the bowl. Removing Processed Foods 1. Press the O (OFF) button. 2. Unplug the Food Processor before disassembling. 3. Turn the work bowl cover to the left and remove. Finger Grip 6. Turn the work bowl to the left to unlock it from the base. Lift to remove. 4. If using a disc, remove it before removing the bowl.
Care and Cleaning 6. To prevent damage to the locking system, always store the work bowl and work bowl cover in the unlocked position when not in use. 1. Press the O (OFF) button. 2. Unplug the Food Processor before cleaning. 3. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth. Dry with a soft cloth. Do not use abrasive cleansers or scouring pads. 4. Please note these BPA-free bowls require special handling.
Using the Multipurpose Blade To chop fresh fruits or vegetables: Peel, core, and/or remove seeds. Cut food in 1 to 11/2-inch (2.5-4 cm) pieces. Process food to desired size, using short pulses, 1 to 2 seconds each time. Scrape sides of bowl, if necessary. To purée cooked fruits and vegetables (except potatoes): Add 1/4 cup (60 ml) liquid from recipe per cup (235 ml) of food. Process food, using short pulses, until finely chopped. Then process continuously until reaching desired texture.
Tips for Great Results Using a Slicing or Shredding Disc To slice or shred fruits or vegetables that are long and relatively small in diameter, such as celery, carrots, and bananas: Cut food to fit feed tube vertically or horizontally, and pack feed tube securely to keep food positioned properly. Process using even pressure with the food pusher. Or use the small feed tube in the two-piece food pusher. Position food vertically in the tube and use the small food pusher to process food.
Using the Dough Blade The dough blade is specially designed for mixing and kneading yeast dough quickly and thoroughly. For the best results, do not knead recipes which use more than 2-3 cups (300 - 400 g) of flour. • Sometimes slender foods, such as carrots or celery, fall over in the feed tube, resulting in an uneven slice. To minimize this, cut food in several pieces and pack the feed tube with the food.
Tips for Great Results • Use a spatula to remove ingredients from the work bowl. • Your Food Processor is not designed to perform the following functions: -- Grind coffee beans, grains, or hard spices -- Grind bones or other inedible parts of food -- Liquefy raw fruits or vegetables -- Slice hard-cooked eggs or unchilled meats. • If any plastic parts should discolor due to the types of food processed, clean them with lemon juice. 22 W10529658A_01_EN.
Troubleshooting Food Processor doesn’t run: • Make sure that the bowl and lid are properly aligned and locked in place and the large food pusher is inserted in the feed tube. • When using the large feed tube opening, make sure that food is not above the Max. Fill line on the feed tube. Max Fill line on feed tube Food Processor not shredding or slicing properly: • Make sure the raised-blade side of the disc is positioned face up on the common adapter.
Service and Warranty Household KitchenAid Food Processor Warranty Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe, Australia and New Zealand: The replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center. A. Repairs when Food Processor is used for operations other than normal household food preparation. B.
