FOOD PROCESSOR INSTRUCTIONS TABLE OF CONTENTS FOOD PROCESSOR SAFETY important safeguards. Electrical requirements . PARTS AND FEATURES Parts and accessories... Accessories selection guide. ASSEMBLING THE FOOD PROCESSOR Attaching the work bowl. At aching the work bowl cover. Installing the adjustable slicing disc . Adjusting the slicing thickness... Installing the reversible shredding disc installing the multipurpose blade. OPERATING THE FOOD PROCESSOR Using the Food Processor Using the 3-n-I feed tube.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: I. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3. Children must be supervised to ensure that they not play with, reach, or use the appliance and its cord. 4.
FOOD PROCESSOR SAFETY 7 + This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance in a safe way by a person responsible for their safety, and if they understand the hazards involved. .
FREE Se hii Externally adjustable shining disc {thin to thick) ~ Multipurpose stainless steel = oo blade Reversible (2 mm and 4 mm) shredding disc Disc adapter puce food pusher Ark bowl cover with rein-} feed tube Externally adjustable slicing control Heavy-duty base
PARTS AND FEATURES A EE mar Cheese Multipurpose stainless steel blade Fruit Fresh herbs § mere, en Mince Puss ;. Pasta Sauce Saks ix Sauces Fiat (soft) Externally adj Potatoes SHEERS po cables sof) able slicing disc 11 Vega tables hard) .
ASSEMBLING THE FOOD PROCESSOR RE) theta ve he Before First Use Before using your Food Processor for the first time, wash all parts and accessories either by hand or in the dishwasher (see “Cleaning the Food Processor” section). NOTE: Your Food Processor is shipped with the week bowl cover installed on the work bowl. IMPORTANT: Place the Food Processor on a dry, level counter top with the controls facing forward. Da not plug in the Food Processor until iris completely assembled.
ASSEMBLING THE FOOD PROCESSOR ETT #5 Install this work bowl cover, being sure jt Jocks inch place, You may need to turn the disc/drive adapter unit it drops down into place. NOTE: The lever only works with the adjustable slicing disc. Changing thickness settings with other discs or blades installed will have no effect on operation. Set the desired pr rein by moving the lever to the left for thinner: slices or to the right for thicker slices.
ASSEMBLING THE FOOD PROCESSOR Finger grip | Hold the reversible shredding disc by the 2 finger grips with the desired shredding side facing UP Insert the disc adapter ing the hole in the bottom of the disc. With the work how! installed, slide the dive adapter onto the power shaft. Then install the work bowl cover, being sure it locks into place, You may need to turn the dis/adapter until it drops jt place.
ASSEMBLING THE FOOD PROCESSOR Place the blade on the power. shaft, ¢ Rotate the blade so it falls into place on the power shaft, * multipurpose blade unities is down a Push to dock: Press down firmly on the Far as it will gos, The multipurpose blade features an internal seal that fits tightly | over the center of the quark bod. stall the work bowl cover, being sure | it locks into place.
Rotating Blade Hazard Always use food pusher, Keep fingers out of openings. Keep away from children, Failure to do so can result in amputation or cuts. Be fare operating the Food Processor, be sure the work bowl, blades, and work bowl cover are properly assembled on the Food Processor base (see ‘Assembling the Food Processor” section). This fine on the work bod indicates the madrassa level of liquid that can be processed by the Food Processor. + To tro on, press. | (low) or 2 (high).
OPERATING THE FOOD PROCESSOR ae Use the entire feed tube and the large. food pusher to process large items. Use the medium food pusher in the ford ube to prose smaller items. Use the small food pusher to slice or Use the drizzle heel in the small ford Shred the smallest, thinnest refs. pusher to slowly drizzle oil or char liquid ingredients inch the wrk bod, The drizzle hole flow rate Is ideal for making mayonnaise.
OPERATING THE FOOD PROCESSOR TEE Press the “0” (Off) button and unplug | Turn the work bowl cover to the left before disassembling. and remove. i using a disc, remove therefore, S| removing the bowl: Holding the disc by the 2 finger grips, lift it straight up, | then remove the adapter, | The multipurpose blade can be removed from the work bow before the contents are emptied You may alas eave the blade hocked in place, Then remove food from the bowl and blade.
TIPS FOR GREAT RESULTS Ry EIB To chop fresh fruits or || vegetables: by Pes, core, candor cement seeds. Cat food in 2.53.75 em {1 to chaffinch) pieces. Process food to desired size, using Speed | {low}. Scrape sides of bowl, i necessary. To puree cooked fruits and vegetables {except potatoes): Add 60 ml (1/4 cup) liquid from recipe per 235 mi (1 cup) of food. Process fad, using hart pulses, unit} finely chopped. Then process continuously until reaching desired texture. Scrape sides of bowl, if necessary.
TIPS FOR GREAT RESULTS See a hr Notating Blade Hazard Always use food pusher. Keep fingers out of openings. Keep away from children. Failure to do so can result in amputation or cuts. To slice or shred fruits or vegetables that are long and relatively small in diameter, such as celery, carrots, and bananas: Cut fod to fit wide mouth feed tube vertically or horizontally, and pack feed tube securely to keep food positioned properly. Do not exceed the Max Fill line.
TIPS FOR GREAT RESULTS TE To avid damage te the blade or motor, do not process food that is so hard or firmly frozen that it cannot be pierced with the tip of a sharp knife. If a piece of hard food, such as a carrot, becomes wedged or stuck on the blade, stop the Food Processor and remove the blade. Gently remove food from the blade. Do rot overfill work bowl. For thin mixtures, fill work bowl up to 1/210 2/3 full. For thicker mixtures, fll work bow! up to 3/4 full.
(Eis ee Te IMPORTANT: These BAP-free bowls require special b candling. If you choose to use a dishwasher instead of hand washing, please follow these guidelines. + Press the "0" (Off) button, then unplug | ta Fond Processable before cleaning Wipe the base, and cord with 3 warm, Busy cloth, and wipe clean with a damp doth. Thoroughly dry with a soft cloth. Do not use abrasive cleaners or scouring pads. Lt Thoroughly dry. al parts after washing. Use gentle dish washing cycles such as normal.
TROUBLESHOOTING if your Food Processor should malfunction or fail to operate, check the following: Food Processor dossier rune * Make sure that the bowl and lid are properly aligned and locked in place and the large food pusher is inserted in the feed whe. When using the large feed tube opening, make sure that food is not above the Max. Fill line on the feed tube. Press only one button at a time. The Food Processor will not operate if more than ane button is pressed at the same time.