5KFP1335 5KFP1325 W10505785D_01_EN_v05.
FOOD PROCESSOR INSTRUCTIONS FOOD PROCESSOR SAFETY Important safeguards.................................................................................................. 6 Electrical requirements.............................................................................................. 8 Electrical equipment waste disposal........................................................................... 8 English TABLE OF CONTENTS PARTS AND FEATURES Parts and accessories......................................
FOOD PROCESSOR SAFETY F IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3.
5. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. 6. Avoid contacting moving parts. 7. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorised Service Centre for examination, repair, or electrical or mechanical adjustment. 8. The use of attachments not recommended or sold by KitchenAid may cause fire, electric shock, or injury. 9.
FOOD PROCESSOR SAFETY P 17. This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices or other working environments - farm houses - by clients in hotels, motels and other residential type environments - bed and breakfast type environments. 18. Be careful if hot liquid is poured into the Food Processor as it can be ejected out of the appliance due to a sudden steaming.
PARTS AND FEATURES Parts and accessories Accessory case* 3-piece food pusher English Work bowl cover with 3-in-1 feed tube 3.1 L (13-cup) work bowl Externally adjustable slicing control Base 950 mL (4-cup) mini-bowl* and mini-blade* Egg whip* Externally adjustable slicing disc (thin to thick) Reversible (2 mm and 4 mm) shredding disc Dough blade* Slicing adapter Drive adapter Disc adapter Stainless steel multipurpose blade *Included only in model 5KFP1335 9 W10505785D_01_EN_v05.
PARTS AND FEATURES A Important Food Processor features Externally adjustable slicing control KitchenAid brand’s exclusive externally adjustable slicing disc allows you to adjust slicing thickness from thin to thick, without having to remove the blade assembly.
ACCESSORIES 3.1 L (13-cup) work bowl The durable, large work bowl provides capacity for large jobs. Disc adapter Adapter fits over the drive adapter and into the bottom of the shredding disc. 950 mL (4-cup) mini-bowl* and mini-blade* Mini-bowl and stainless steel mini-blade are perfect for small chopping and mixing jobs. Stainless steel multipurpose blade Versatile blade chops, minces, blends, mixes, and emulsifies in a matter of seconds.
ACCESSORIES A Disc assembly overview There are two different disc adapters included with the food processor. One is used exclusively with the adjustable slicing disc. The other is used with the reversible shredding disc and all other optional discs. Adjustable slicing disc Reversible shredding disc Slicing adapter Drive adapter Drive adapter Disc adapter Properly assembled 12 W10505785D_01_EN_v05.
ACCESSORIES Action Mince Chop Setting Puree Food Cheese Chocolate Fruit Fresh Herbs Nuts Tofu Vegetables Meat Fruit (soft) Potatoes Tomatoes Vegetables (soft) Slice thick Or Mini-bowl* and mini multipurpose stainless steel blade* Shred fine Adjustable slicing disc Cheese Chocolate Fruit (hard) Vegetables (hard) Potatoes Vegetables (soft) Shred medium Multipurpose stainless steel blade Pasta Sauce Pesto Salsa Sauces Cake Batter Pie Dough Mix Slice thin Accessory English Accessories select
PREPARING THE FOOD PROCESSOR FOR FIRST USE Before first use Before using your Food Processor for the first time, wash the work bowl, work bowl cover, mini-bowl*, feed tube pushers, discs, and blades either by hand or in the dishwasher (see “Care and cleaning”). Removing the work bowl cover from the work bowl Your Food Processor is shipped with the work bowl cover installed on the work bowl, with the mini-bowl* inside the work bowl.
SETTING UP YOUR FOOD PROCESSOR Attaching the work bowl English NOTE: Select the accessory you would like to use and install it according to the instructions on the following pages. Power Shaft 1 Place the Food Processor on a dry, level countertop with the controls facing forward. Do not plug in the Food Processor until it is completely assembled. 3 Grasp the work bowl handle and turn the bowl counterclockwise to lock it on the base.
S SETTING UP YOUR FOOD PROCESSOR Attaching the work bowl cover NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover are properly locked on the base, and the large pusher is inserted to the maximum fill line on the feed tube (approximately halfway down). Food pusher 1 Place the work bowl cover on the work bowl with the feed tube just to the left of the work bowl handle. Grasp the feed tube and turn the cover to the right until it locks into place.
SETTING UP YOUR FOOD PROCESSOR Installing the adjustable slicing disc English IMPORTANT: The adjustable slicing disc can only be installed in one direction. 1 With the work bowl installed, place the drive adapter on the power shaft of the base. 2 Holding the adjustable slicing disc by the 2 finger grips, align the pins onto the adjustable slicing disc adapter into the L-slots on the disc. Slide the disc down onto the adapter and turn to engage the pins in the L-slot.
SETTING UP YOUR FOOD PROCESSOR S Adjusting the slicing thickness NOTE: The lever only works with the adjustable slicing disc. Changing thickness settings with other discs or blades installed will have no effect on operation. Thinner Thicker Set the desired slicing thickness by moving the lever to the left for thinner slices or to the right for thicker slices. 18 W10505785D_01_EN_v05.
SETTING UP YOUR FOOD PROCESSOR Installing the shredding disc English IMPORTANT: When using the reversible shredding disc, have the desired side (medium/fine) facing up. 1 Holding the disc by the two finger grips, insert the disc adapter into the hole in the bottom of the disc. 2 Slide the drive adapter into the disc adapter as far as it will go, until it clicks into place. 3 With the work bowl installed, slide the drive adapter onto the power shaft.
SETTING UP YOUR FOOD PROCESSOR Installing the multipurpose blade or dough blade* 1 Place the blade on the power shaft. Rotate the blade so it falls into place on the power shaft. 2 Push to lock. Press down firmly on the multipurpose blade until it is down as far as it will go. The multipurpose blade features an internal seal that fits tightly over the centre of the work bowl. Install the work bowl cover, being sure it locks into place.
SETTING UP YOUR FOOD PROCESSOR English Installing the mini-bowl* and mini-blade* 1 Place the mini-bowl inside the work bowl over the power shaft. Rotate the mini-bowl until the tabs on the top edge of the bowl drops into the indents on the top of the work bowl. 2 Insert the drive adapter into the mini-blade, and place on the power shaft. It may be necessary to rotate the blade until it falls into place. Press down firmly to lock it into place.
SETTING UP YOUR FOOD PROCESSOR S Installing the egg whip* IMPORTANT: The egg whip can only be used with the work bowl. 1 Be sure the egg whip is properly assembled. If the two pieces have been disassembled for cleaning, align the pin on the egg whip adapter with the slot on the egg whip, and rotate to lock into place. 3 Install the work bowl cover, being sure it locks into place. 2 With the work bowl in place on the base, place the egg whip on the power shaft.
SETTING UP YOUR FOOD PROCESSOR The 3-in-1 feed tube features a 3-piece food pusher. Use the entire food pusher to process large items, or use the inner portions to create medium-sized or small feed tubes to process smaller items. To slice or shred small items, insert the 3-piece food pusher into the feed tube, then lift out the small pusher to remove. Use the small feed tube and pusher to process small or slender items, like single carrots or celery stalks.
USING YOUR FOOD PROCESSOR U Before use Before operating the Food Processor, be sure the work bowl, blades, and work bowl cover are properly assembled on the Food Processor base (see “Setting up your Food Processor”). This line on the work bowl indicates the maximum level of liquid that can be processed by the Food Processor. 24 W10505785D_01_EN_v05.
USING YOUR FOOD PROCESSOR IMPORTANT: Wait until the blade or disc comes to a complete stop before removing the work bowl cover. Be sure to turn off the Food Processor before removing the work bowl cover, or before unplugging the Food Processor. 1 To turn on the Food Processor, press the SPEED 1 button (low speed, for soft food) or the SPEED 2 button (high speed, for hard food). The Food Processor will run continuously and the indicator light will glow.
USING YOUR FOOD PROCESSOR U Removing processed foods 1 Press the O (OFF) button. Unplug the Food Processor before disassembling. 2 Turn the work bowl cover to the left and remove. C 3 If using a disc, remove it before removing the bowl. Holding the disc by the 2 finger grips, lift it straight up. Remove the adapter. 4 If using the mini-bowl*, grasp and remove the bowl using the finger grips located along the top edge of the bowl. *Included only in model 5KFP1335 26 W10505785D_01_EN_v05.
English USING YOUR FOOD PROCESSOR 5 Turn the work bowl to the left to unlock it from the base. Lift to remove. 6 The multipurpose blade can be removed from the work bowl before the contents are emptied. You may also leave the blade locked in place. Then remove food from the bowl and blade with a spatula. CARE AND CLEANING 1. Press the O (OFF) button. 2. Unplug the Food Processor before cleaning. 3. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth.
TIPS FOR GREAT RESULTS T Using the multipurpose blade To chop fresh fruits or vegetables: Peel, core, and/or remove seeds. Cut food in 1 to 2.5-4 cm (11/2-inch) pieces. Process food to desired size, using short pulses ( ), 1 to 2 seconds each time. Scrape sides of bowl, if necessary. To puree cooked fruits and vegetables (except potatoes): Add 60 mL (1/4 cup) liquid from recipe per 235 mL (1 cup) of food. Process food, using short pulses ( ), until finely chopped.
TIPS FOR GREAT RESULTS To slice or shred fruits or vegetables that are long and relatively small in diameter, such as celery, carrots, and bananas: To slice uncooked meat or poultry, such as stir-fry meats: Cut or roll food to fit feed tube. Wrap and freeze food until hard to the touch, 30 minutes to 2 hours, depending on thickness of food. Check to be sure you can still pierce food with the tip of a sharp knife. If not, allow to thaw slightly. Process using even pressure.
TIPS FOR GREAT RESULTS T Using the dough blade* The dough blade is specially designed for mixing and kneading yeast dough quickly and thoroughly. For the best results, do not knead recipes which use more than 350 g (3 cups) of flour. Helpful hints • To avoid damage to the blade or motor, do not process food that is so hard or firmly frozen that it cannot be pierced with the tip of a sharp knife.
TIPS FOR GREAT RESULTS • Use a spatula to remove ingredients from the work bowl. English • When preparing a cake or cookie batter, use the multipurpose blade to cream fat and sugar first. Add dry ingredients last. Place nuts and fruit on top of flour mixture to prevent overchopping. Process nuts and fruits, using short pulses ( ), until blended with other ingredients. Do not overprocess.
TROUBLESHOOTING W If your Food Processor should malfunction or fail to operate, check the following: Food Processor doesn’t run: • Make sure that the bowl and lid are properly aligned and locked in place and the large food pusher is inserted in the feed tube. • When using the large feed tube opening, make sure that food is not above the Max Fill line on the feed tube.
WARRANTY AND SERVICE Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe, Middle East and Africa: The replacement parts and repair labour costs to correct defects in materials or workmanship. Service must be provided by an Authorised KitchenAid Service Centre. A. Repairs when Food Processor is used for operations other than normal household food preparation. B.
©2017 All rights reserved. Specifications subject to change without notice. W10505785D W10505785D_19_back.