Use and care guide

25
English
Using the pulse control ( )
USING YOUR FOOD PROCESSOR
The pulse control ( ) allows precise control
of the duration and frequency of processing.
It’s great for jobs which require a light touch.
Just press and hold the PULSE (
) button to
startprocessingathighspeed,andrelease
it to stop.
USING YOUR FOOD PROCESSOR
Using the speed 1/speed 2 control
IMPORTANT: Wait until the blade or disc comes to a complete stop before removing the
work bowl cover. Be sure to turn off the Food Processor before removing the work bowl
cover,orbeforeunpluggingtheFoodProcessor.
NOTE:IftheFoodProcessorfailstooperate,makesuretheworkbowlandcoverare
properly locked on the base (see “Setting Up Your Food Processor”).
2
TostoptheFoodProcessor,pressthe
O (OFF) button. The indicator light will
go out and the blade or disc will stop
within a few seconds.
1
ToturnontheFoodProcessor,press
the SPEED1button(lowspeed,for
soft food) or the SPEED 2 button
(highspeed,forhardfood).TheFood
Processor will run continuously and the
indicator light will glow.
W10505785D_01_EN_v05.indd 25 3/23/17 2:52 PM