Use and care guide

12 | OPERATING YOUR IMMERSION BLENDER
ASSEMBLING THE IMMERSION BLENDER
Before using the KitchenAid Immersion
Blender for the rst time, wipe the motor
body and attachment adapters with a
clean, damp cloth to remove any dirt or
dust. Mild dish soap may be used, but do
not use abrasive cleansers.
NOTE: Do not immerse the motor
body or the adapters in water.
Dry with a soft cloth. Wash all the other
attachments and accessories by hand
or in the top rack of the dishwasher.
Dry thoroughly.
NOTE: Always be sure to unplug
the power cord from the wall
socket before installing or removing
attachments.
33 cm blending arm
attachment*
Bell guard*
Easily snaps onto bell blade and provides
protection to blades while the Immersion
Blender is not in use.
Pan guard*
The pan guard snaps onto any of the
included bell blades and provides
protection to the Immersion Blender and
your cookware.
NOTE: Ensure bell guard is installed
with the mounting clips positioned
between the ports on the bell blades.
NOTE: Ensure pan guard is installed
with the mounting clips positioned
between the ports on the bell blades.
Port
Port
*Not available on all models
OPERATING YOUR IMMERSION BLENDER
W11087402A_01_EN.indd 12 3/7/17 9:45 AM