5KHB3583 W10532509A_01_EN_Final4.
Cordless Hand Blender INSTRUCTIONS Hand blender SAFETY Important safeguards........................................................................................... 6 Electrical requirements ...................................................................................... 7 Electrical equipment waste disposal.................................................................... 7 Disposing of KitchenAid Lithium-Ion (Li-Ion) battery..........................................
Hand BLender Safety H IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put motor body of Hand Blender, battery, charger, charger’s cord or plug in water or other liquid. 3.
Hand Blender Safety Electrical requirements English Battery Voltage: 12 V Lithium-Ion (Li-ion) / 1.5 Ah / 16 Wh Battery Model No.: 5KCL12IBOB Charger Input : 18 V / 660 mA Output : 12 V / 550 mA Charger Model No.: 5KCL12CSOB Charger Adapter Input : 220-240 V / 50/60 Hz / 18 W Output : 18 V / 660 mA Charger Adapter Model No.: W10533411 Electrical equipment waste disposal This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
Parts and Features Ope Parts and features Battery location Pan guard Front of motor body Bell guard Back of motor body Battery release lever / Hanging loop Unlock button Speed control buttons LED display speed selection indicator Pulse button Grip LED display battery life indicator Battery 20 cm (8") Stainless steel blending arm with S-blade LED charge indicator/ Lid release Charger base 8 W10532509A_01_EN_Final4.
Operating the hand blender English Before first use: charging the battery 1 Plug in the charger. 2 Push the lid release button to open the lid. 3 Slide the battery into the charger, aligning the flat side of the battery to the flat side of the port, and push down to click into place. 4 The LED indicator will begin to flash slowly and continuously as it charges. When the battery is fully charged, the LED will display a continuous light.
operating the hand blender Ope Assembling the Hand Blender Before First Use Before using the Hand Blender for the first time, wipe the motor body, the blending arm with blade and the guards with a clean, damp cloth to remove any dirt or dust. Mild dish soap may be used. Do not use abrasive cleansers. Dry thoroughly with a soft cloth. See “Care and Cleaning” section for more information. 1 Insert blending arm into motor body and twist until it clicks to lock in place.
Operating the hand blender Using the LED display panel English IMportant: The unlock button must be pressed before the Hand Blender will operate. Battery life indicator LED display 1 When operating the controls on the Hand Blender, always make sure the LED display is facing toward you. Grip the handle with your thumb on the back of the unit, and your fingers on the controls in front, as shown. Unlock button 2 The bottom bar on the LED display panel is the battery life indicator.
operating the hand blender T Using the blending arm NOTE: Your Hand Blender is ideal to use for blending, crushing, or puréeing. It is best used for soups, cooked vegetables, sauces, baby food, smoothies, milk shakes, frosting, or crushed ice. Unlock button Speed control buttons LED display 1 Speed selection indicator Press the UNLOCK button. LED display will light up when unit is ready. Pulse button 2 Use the arrow buttons to adjust the speed, using the LED display as a guide.
Tips for great results Techniques for better blending and crushing Wrist movement English Drawing up For better blending: Rest the Hand Blender on the bottom of the container momentarily, then hold at an angle and using a light circular motion, slowly draw it upwards against the side of the container. Allow your wrist motion and the weight of the Hand Blender to do the work. As you draw up the Hand Blender, you will notice the ingredients from the bottom of the container rising up.
care and cleaning S Cleaning the Hand Blender 1 Remove blending arm (see “Operating the Hand Blender” section). 2 Wash blending arm and guards in the top rack of the dishwasher or by hand in hot, soapy water. Dry with a soft cloth. NOTE: Always remove the battery from the Hand Blender if it is left unattended and before assembling, disassembling or cleaning. Do not immerse motor body in water. 3 Wipe the motor body with a damp cloth. Use mild dish soap. Do not use abrasive cleansers.
SErVice and warranty Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe, Middle East and Africa: The replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center. A. Repairs when Hand Blender is used for operations other than normal household food preparation. B.
© 2013. All rights reserved. Specifications subject to change without notice. W10532509B W10532509B_18_BackCover.