Use and care guide

16
CMD + SHIFT CLICK TO CHANGE COPY OPERATING THE COMMERCIAL IMMERSION BLENDER
Using the Commercial Immersion Blender with the whisk attachment
1. Insert the whisk attachment into the
motor body and twist to lock. The
attachment mark on the whisk should
line up with the bottom of the motor
bell when fully attached.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
2. Plug the power cord into an earthed
outlet.
3. Set Commercial Immersion Blender to
your desired speed on the speed dial.
OPERATING THE COMMERCIAL IMMERSION BLENDER
W10859533A_01_EN_v18.indd 16 2/6/17 3:53 PM