Stand Blender 5KSB13**A W11344951A.
PARTS AND FEATURES 1 6 2 7 10 3 13 8 3.1 OUN 8oz CES =1 Cup 48 oz 44 oz 40 oz 36 oz 32 oz 11 14 12 15 28 oz 24 oz 20 oz 16 oz 9 12 oz 4 5 1 Lid Centre Cap 8 Juice Container* (1 Litre capacity) 2 Lid with Vent Well 9 Gear Assembly* 3 Jar (1.4 Litre capacity) 10 Personal Jar** (0.4 Litre capacity) 3.1 Glass Jar**** (1.4 Litre capacity) 11 Blade Assembly of Personal Jar** 4 Base 12 Personal Jar Easy-Drink Lid** 5 Control Dial 13 Small Batch Jar*** (0.
ENGLISH PRODUCT SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock do not put the Stand Blender Base in water or other liquid. 3.
PRODUCT SAFETY 13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 14. Refer to the “Care and Cleaning” section for instructions on cleaning the surfaces in contact with food. 15. Always operate the Blender with cover in place. 16. When blending hot liquids or ingredients, Lid Centre Cap should remain in place over the lid opening.
Before first use, clean all parts and accessories (see Care and Cleaning section). Be sure the countertop beneath the Blender and surrounding areas are dry and clean. IMPORTANT: When moving your Blender, always support/lift from the Blender base. The base will become disengaged from Jar if, carried by Blender Jar or Blender Jar handle only. 1 ENGLISH BLENDER USAGE 2 1 2 1500 ml Slot 1250 ml 1000 ml Add ingredients into Blender Jar OR Glass Blender Jar (max. 1.4 Litre).
BLENDER USAGE PULSE /ICE CRUSH FUNCTION USAGE Your Blender offers a "Pulse/Ice Crush ( P )" function with a soft start to avoid ingredient splatter. In this function, the Blender will operate at optimal speed to crush ice. This function will continue until you release the Control Dial, returning to (O). 1 2 2 3 1 O P Place ingredients or Ice cubes into the Blender Jar. Firmly secure the Lid with Lid Centre Cap on Blender Jar.
3 ENGLISH BLENDER USAGE 4 2 3 1 O P Turn the Control Dial from (O) to desired speed for constant operation. When finished, turn the Blender off by returning Control Dial to (O). Always remove the Personal Jar with the Blade Assembly from the Base. USING THE SMALL BATCH JAR The Small Batch Jars are perfect for smaller recipes like sauces, dressings, marinades and more. Before first use, clean all parts and accessories (see “Care and Cleaning” section).
USING THE CITRUS PRESS Before first use, clean all parts and accessories (see “Care and Cleaning” section). 1 2 2 Drive Shaft 1 Place the Gear Assembly on the base. Then, place the Juice Container on the Gear Assembly and twist clockwise to lock in place. Place the Pulp Basket and then the Reamer into the Juice Container by aligning them with the Drive Shaft. 3 4 2 3 1 O P Hold down the halved citrus fruit on the Reamer. Turn the Control Dial from (O) to speed (1) to start juicing.
ENGLISH CARE AND CLEANING USING THE CLEAN FUNCTION 1 2 2 3 1 O P Empty the Blender Jar. Fill half of the Jar with warm water and add 1 or 2 drops of dish-washing liquid. Place the Blender Jar on the base. Secure the Lid and Lid Centre Cap. Turn the Control Dial to speed (3) and run the Blender for 15-20 seconds. Remove the Blender Jar, empty contents and rinse with warm water and dry thoroughly. NOTE: To avoid damaging the Blender, do not immerse the Blender base or cord in water.
TROUBLESHOOTING GUIDE PROBLEM If Blender fails to start: If Blender stops while blending: SOLUTION Check to see if the Blender is securely plugged into an earthed electrical outlet. If you have a circuit breaker box, make sure the circuit is closed. Try unplugging the Blender, then plug it back into an earthed electrical outlet. The Blender becomes overloaded or jammed. It will automatically shut off to prevent damage to the motor. Unplug the power cord.
ENGLISH CUSTOMER SERVICE In Australia: For any questions, or to find the nearest Authorised KitchenAid Service Centre, please find our contact details below. NOTE: All service should be handled locally by an Authorised KitchenAid Service Centre. Toll free number: 1-800-990-990 Phone number: 02 49026500 Address Australia: KitchenAid Australia Pty Ltd 6-8 Billbrooke Close Cameron Park NSW 2285, Australia Phone: 1-800-990-990 Mobile: 0249026500 Email: enquiries@KitchenAid.com.au In New Zealand: Website: www.
©2019 All rights reserved. Specifications subject to change without notice. W11344951A W11344951A.