5KSB1585
CMD BLENDER + SHIFT INSTRUCTIONS CLICK TO CHANGE COPY TABLE OF CONTENTS BLENDER SAFETY Important safeguards........................................................................................... 3 Electrical requirements....................................................................................... 4 PARTS AND FEATURES......................................................................................... 5 ASSEMBLING THE BLENDER Preparing the Blender for use...................................
English BLENDER SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Blender in water or other liquid. 3.
BLENDER SAFETY 7. Do not use outdoors. 8. Do not let cord hang over edge of table or counter. 9. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running. 10. Blades are sharp. Handle carefully. 11. Always operate Blender with cover in place. 12. The use of attachments not recommended by KitchenAid may cause a risk of injury to persons. 13.
Lid with ingredient cup English PARTS CMD +AND SHIFT FEATURES CLICK TO CHANGE COPY BPA Free pitcher Stainless steel blade Clean touch control pad Speed selection buttons Die-cast metal base 5
ASSEMBLING THE BLENDER Preparing the Blender for use Before First Use Before using your Blender for the first time, wipe Blender base with a warm damp cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash pitcher, lid, and ingredient cup in warm, sudsy water (see “Care and Cleaning” section). Rinse parts and wipe dry. Tab Slot Align the pitcher tabs with the slots on the base. The pitcher handle may be on the right or left side of the blender base.
OPERATING THE BLENDER Using the Blender Before Use English While the Blender Power indicator light or the PULSE mode indicator light is on: - Do not interfere with blade movement. - Do not remove pitcher lid. Before operating the Blender, make sure the pitcher is properly locked onto the Blender base. 1 Before using the Blender, plug into a grounded outlet, and press POWER ( ). The Power indicator light will flash when ready. The Blender has four speeds: CHOP ( ), MIX ( ), PUREE ( ),and LIQUEFY ( ).
OPERATING THE BLENDER 8 4 When finished, press POWER ( ) to stop the Blender, then press POWER ( ) a second time to turn off. Unplug Blender before removing the pitcher. 6 Then lift the lid from the side to remove completely from the pitcher. 5 To remove the lid, first use the loop on the back of the lid to lift the lid and break the seal.
OPERATING THE BLENDER IMPORTANT: If blending hot foods or liquids – such as soups or sauces – be sure that the lid is securely in place and use only the HOT FOODS ( ) function. 1 Before operating the Blender, make sure the pitcher is properly positioned on the base. 2 Put ingredients into the pitcher, and securely attach lid to pitcher, making sure the handle on the lid aligns with the handle on the pitcher, as shown. 3 Press POWER ( ), then press the HOT FOODS ( ) button.
CMD + SHIFTTHE OPERATING CLICK BLENDER TO CHANGE COPY Using the Crush Ice function Your Blender offers a CRUSH ICE ( ) function. When selected, the Blender will automatically pulse for 30 seconds at staggered intervals at the optimal speed for crushing ice or other ingredients. 1 Before operating the Blender, make sure the pitcher is properly positioned on the base. 2 Put ingredients into the pitcher and firmly place lid. Use up to 1/2 tray of cubed ice. 3 Press POWER ( ), then press CRUSH ICE ( ).
OPERATING THE BLENDER Using the Pulse function ) function, which allows a “Pulse-at-any-speed” feature. English Your Blender offers a PULSE ( 1 Before operating the Blender, make sure the pitcher is properly positioned on the base. 2 Put ingredients into the pitcher and firmly place lid. NOTE: PULSE mode will not work with the HOT FOODS ( CRUSH ICE ( ) modes. 3 Press POWER ( ), then press PULSE ( ).
OPERATING THE BLENDER Using the Blender pitcher ingredient cup and Soft Start blending feature • The Blender pitcher ingredient cup can be used to measure and add ingredients. Remove cup and add ingredients at CHOP ( ) or MIX ( ) speeds. When operating at higher speeds with a full pitcher or with hot contents, stop the Blender and then add ingredients. IMPORTANT: If blending hot foods or liquids, be sure that the lid is securely in place and use only the HOT FOODS ( ) function.
TIPS FOR GREAT RESULTS • If you’re making beverages using ice, start with CRUSH ICE ( ), then finish with LIQUIFY ( ) in order to produce a smoother texture. • Ice directly from the freezer will crush better than partially melted ice for snow. • Smaller ice cubes can be chopped or crushed faster than large ones. • For many ingredient mixtures, start the blending process at CHOP ( ) to thoroughly combine the ingredients. Then increase to a higher speed, as desired.
TIPS FOR GREAT RESULTS Prepare pancake or waffle batter from mix: Place mix and other ingredients in pitcher. Cover and blend at MIX ( ) until well-mixed, 10 to 20 seconds. Stop the Blender and scrape sides of the pitcher as needed. Grate cheese: Cut very cold cheese into 1.5 cm cubes. Place up to 1/2 cup (120 mL) cheese in the pitcher. Cover, and blend at LIQUIFY ( ) about 5 to 10 seconds. For hard cheeses, such as Parmesan, bring to room temperature then blend at LIQUIFY ( ) for 10 to 15 seconds.
TROUBLESHOOTING IMPORTANT: The Blender will not operate at any speed unless the POWER ( pressed first. ) button is Blender does not operate when a setting is selected No indicator lights are lit. All indicator lights are flashing at the same time. One indicator light is flashing alternately. English Check to see if the Blender is plugged into a grounded outlet. If it is, press POWER ( ); then unplug the Blender. Plug it back in to the same outlet, and Press POWER ( ).
© 2014. All rights reserved. Specifications subject to change without notice.